98exploreron22

Box all in the cargo area. no wall. this explorer has had lots of setups in it and lots of testing when i was looking for numbers with it. the best i have done in this explorer is a 149.6 on the TL on the dash. it has lots and lots of fill and seal and lots of SS damp on the roof floor and doors 3layers min everywhere. i fill and sealed my back door to.... and that 149.6 was a fartbox with 4-12'' DD subs and two AQ3500 at .5 ea tuned to 46hz my explorer.... it helps alot to have your on TL when looking for numbers. i think that setup had a 150//151 in it just got tired of chaceing numbers. i just wont it to sound dam good and get loud now.. i will let the pro chace the numbers.

You might wont to get some batts for your setup. your looking at 2400/2600rms with a stock alt. i think your going to have very bad volt drop without geting some batts to help out..

you can get a new in the box BC3500 for $670.00 thats what i would do thay are dam good amps for the $$$$$$$$$

you are right 300rms ea.....i was thinking thay where 375rms ea...my bad...

8-10'' Dcon would be 3000rms so only maybe 1400 over maybe... just hope that the 8-10'' Dcons like being in a common chamber. i no some subs dont like it....

I hope i am the first to run 8-10'' Dcon. thats onething that made me go with the 8-10'' over the 4-12''subs seams like every explorer i see around where i stay has 2-15'' are 3-12'' are 4-12'' -CVR-are-CVX- subs i just dont wont to be like everyone els thats y i sold the 4-12'' subs and box to my buddy. dont get me wrong thay would get down and get loud and took the power of the two-AQ2200 very well i hope the 8-10'' Dcon will do the same.. and yes i set every amp with my o-scope i dont wont clip city in my setup.

I will send you some pic of the setup when i get done with it. i only have to order the subs going to start the box on wednesday i have the ports allready and the 1.5'' rod for braceing just have to go get the MDF and get the box done. ------ricksi30------ thanks for all your help and time...

I think i am going to try the 8-10'' subs you just dont see 8-10s in the cargo area in a explore every day and i think it will look badass to. i do all my box myself i use the new bassboxpro 6.... i am looking at 11.78 port area per foot with the 4-6'' ports will that be good are do i need more port area

What do you think about the box spec i posted for this setup. i just wont all the info i can get so when the subs get here the box would be done and in the truck ready for the subs.....again thanks for your insite on this

I have personal experience with every line of SSA subs, and tried my best to help you. If you have any other questions I'd be glad to answer them if I can. ----------THANK YOU FOR YOUR INFO------- i was thinking that haveing 8-subs to spred the power would be better than 4 subs and this is the thuck i drive every day i wont loud loud loud with the space i have 2use not numbers who wonts a fart box in there every day driver not me.

I asked here about this setup ///// yall are the ones that have been runing the SSA subs thats y i asked yall.........

So your saying that cone ant king then that the 4-12'' Gcon would sound and do better than 8-10'' Dcon on the same power. thats wha i have been asking------

I come to this form 2 ask about the setup i am thinking of runing 4-12'' Gcon are 8-10'' Dcon subs and have not got any help with what i ask ,,,,,,,,, if this is how the SSA form is when trying 2get help with my setup runing there subs then maybe i need 2re think my sub setup... i am not asking you what you wont me 2run in my setup i ask about 4-12'' Gcon are 8-10'' Dcon on 2-AQ2200. i dont mind finding a sub comp that will help me with this setup. and wonts my business. i would think that SSA would wont my business but if not thats fine thay dont make the only sub out there....

8-10'' Gcon would be over my $1000.00 buget for the subs,,,,,,,,,, thats y i said 4-12'' Gcon Are 8-10'' Dcon subs,,,, its one are the other ,,,,,,, i wonted to tryout the SSA subs but the way its looking on this form maybe i was worng.....

I dont have the room-air space- to run two 18'' subs at the most i have 10.8cf net to work with. i am not doing a wall.. its going in the cargo area of my 98 explorer. my batts are under the explorer where the spare tire was made a batt rack. all 4 amps are under the back seat so i only have somuch room to work with.

Anyone wont to let me no what thay think on this,,,, I am wonting to order the subs by 8-17-12 so any help would be nice guys

I had 24'' rims on my explorer for two days thay rode ruffer than a --BJ-- from a girl with braces,,,,,,,,, I now run 22'' with a 265-tire and the ride is fine just like with my 20''rims

I have been runing 4-sundown sa-12 in my 98-explorer in a 7.6cf net box with a 110in of port on two AQ-2200 straped at 2 /// I just sold the box and subs to a buddy of mine and am thinking about runing 4-12'' Gcon with the two AQ-2200 in 10.1cf net with 4-6'' areo ports tuned to 32-33hz Are i was thinking of runing 8-10'' Dcon with the two AQ-2200 in 10.1 cf net with 4-6'' areo ports tuned to 32-33hz that would give me 113.04in of areo port with that box. So what i am asking is with the same power for the 4-12'' are the 8-10'' subs.. is cone area king what do yall think will be the best setup in my explorer.. and b4 yall ask yes i have the Electrical to run the amps..two duel Dc power 220amp alts and 6-fullriver 110ah agm batts.. thanks 4any help you can give me on this

Thanks guys ,, the link was not working lastnite. i am going to try to put a set of Icon 18's in my 98 ford explorer with a bc3500 on them subs up port back if i can make it fit in the back.

Come on guys some help with this would be nice------thanks for any help

What do the Icon 18'' like for box size and port will be runing a set on a Crescendo bc3500 ---- any help on info thanks

WTF happened to ----SHAWN---- leg

17'tall 40'wide 30'deep--------- port at bottom ------- 6'tall 18'wide 22'deep ------------

Anything new with this

It takes power to make power.