Duran

The Wood Glue version of Gorilla Glue is just fine

Talk all the shit you want. ZCON is too late. I just dropped +$700 on subs this past Friday. I'm not talking shit. You know that, cool it.

Your woofers will blow with 2000 watts at 26hz with lots of port. Unless you plan to have the gain on the amp mostly to the left you need bigger speakers for what you're trying to do. Yeah it's 90% install and 10% equipment, but...sa-10's don't do that. Sorry. Port area(in most cases) won't cause mechanical failure, internal volume is the most important factor there.

I was gonna say 2.7 million wattz....

Myst resist the urge to poke fun at edouble, must....resist!

It applies thermodynamics to the enclosure, the wiggling fibers create heat, warm air is less dense, less dense air means the sound pressure can travel through it with less resistance.

Ascendent Audio Mayhem, or the XCON. TC Sounds has moved production to China, and have done downhill quality wise. The BTL(depending on the generation) will be better suited in an SPL oriented installation, they generally peak higher.

Both woofers will take the power, but they are both designed to be different woofers.

WHAT IS THAt DELICIOUS WOOFER ON YOUR AVTR PIC? looks custom and chrome. It's a Nightshade V.1. Please keep this thread on topic.

She seems like an artard...

This is correct. They are not available for purchase, the ones in circulation are for testing purposes.

It's going to vary from vehicle to vehicle, and installation. Just an example, I believe Dvalue has two 10" or 12" icons (not a spl orientated driver) in a trunk car (sealed off, front firing) and he's doing hair tricks... 10" ICON's, on 3Kw, in a super secret megaloud enclosure.

IE blows nuts

you're a baddie Duran!!! play nice.... Its all good man. I will still help Duran remove his door panels when he cannot figure it out himself. It's done actually, just working on substage now

"subsam" on here has his N2 inverted, it's a nice install.

Do they have specifications on said cable? If not, they must be a bad company.

How many do you need? I think I have some lying around somewhere. I think I have some set-screw types as well. I need 4 at the moment, but I'm pepping to build several more woofers so, a few hundred, lol These ones Ryan: I found a place that sells them for $7/pair, with $2.50 shipping, and $.50 for additional terminals, that gets expensive fast. I'm wanting to get some form the source

I giggle at the fact that nowadays 10Kw is fairly common.

If it was designed correctly, it will sound just like any other subwoofer.

That was the triple joint ring hitting the top plate.

Xmax alone will not tell you anything. If that were the case, manufacturers would only list Xmax. Do some more research on Thiele/Small parameters and then decide which woofer best suits your goals.

WTF were you doing down there? $100 says he is joining MS13.

How many do you need? I think I have some lying around somewhere. I think I have some set-screw types as well. I need 4 at the moment, but I'm pepping to build several more woofers so, a few hundred, lol These ones Ryan:

No, woofer terminals

You guys know where I can get some good spring loaded binding posts? I've searched through pages of Google results, the cheapest I could find came out to be $170 for a pair, because they shipped from some 3rd world country