What are the specs on an 18" havoc?

[burnerofhells 0]

God its annoying not having a source to find out info on AA's drivers.

Does anyone have the specs for the 18" Havoc? Well,i have most of the specs but i am looking for.....

What is the cut out diameter?

What is the overall diameter (outside diameter)?

What is the mounting depth?

What is the driver displacement?

Thanks

[Mark LaFountain 1,054]

They should use the exact basket the Fi stuff uses, that being said, Fi's website says.

Sub OD: 18.500” | 18.500”

Cut ID: 16.750” | 16.750”

next two specs are for a BTL 18", could be very simular for the Havoc, we'll wait and see.

Mounting depth: 9.750” * | 9.750” *

Displacement: 0.26cuft * | 0.26cuft *

[burnerofhells 0]

I don' understand what we are waiting for. The subs are out and people have them do they not??

I'll be mad if i just bought one and somehow didn't realize that the thing hasnt even come out yet!

How long are we talking for the sub to ship if I just bought one yesterday?

[patented17 21]

6-12 months

[patented17 21]

nah man, usually around 3-7 days I'd suppose, that's building and shipping

Edited February 16, 2008 by patented17

[burnerofhells 0]

you did scare me with the 6 month comment!

But like i said.. How is it they are making subs, people have them, and no one can give me the rest of the specs?

I guess i can go on SSaudio's hunch / thoughts, but knowing for sure will make my box turn out a lot better if that is wrong.

Edited February 16, 2008 by burnerofhells

[cx-7heaven 7]

It's an fi q with a triple stack magnet. The extra magnet will only make something like a .001 difference in driver displacement. Mounting depth is 10 inches.

[Mark LaFountain 1,054]

They should use the exact basket the Fi stuff uses, that being said, Fi's website says.

Sub OD: 18.500

[Duke 0]

I just measured my Havoc 18s.

Outer diameter with the gasket on is 18 15/32" (18.46875")

Mounting hole cutout is 16 23/32" (16.71875")

Mounting depth is between 9 11/16" (9.6875") and 9 12/16" (9.75")

[burnerofhells 0]

Thanks guys for the help.

Only thing im confused at now is the displacement.

Here is what i have heard so far

0.24cuft (same as the Q18)

0.25cuft (someone else asking what the displacement was. This is the answer he got)

0.26cuft (BTL 18 specs)

0.27cuft (from ssaudio)

So, anyone have any more incite on this one?

Edited February 18, 2008 by burnerofhells

[cx-7heaven 7]

Here is what i have heard so far

0.24cuft (same as the Q18)

0.25cuft (someone else asking what the displacement was. This is the answer he got)

0.26cuft (BTL 18 specs)

0.27cuft (from ssaudio

You have a range of .03 cu ft in displacement there. I wouldnt worry about it, you'll never get it perfect.... hell, the wiring will probably take up .03!