can anyone get ahold of godsmack

[Twitch 0]

i'm still saving up for the new car... so when ever i get that...

and i just found out today i have a water leak on the left side of my trunk... which is very new... never had any problems before..

so everything was pulled out today except my cd player and 2 front factory speakers...

*sigh*

i'm already planning out my install for the car i'm planning on getting... the only think i can't figure out is what the hell i'm gonna do with these midbasses...

they are Fing huge

[Twitch 0]

ok...

update...

bottom and back of the box were soaked all the way through

wood is definatly warped...

the cut out from the sub was a little too big. due to some bad drilling on my part i can't use all the skrew holes. due to the round basket and the extreme weight of the h2 i have a nice air leak at the top of the cutout.

conclusion...

weight till summer. get new car. get new box.

my expression...

expect some in the box port sometime tomorrow...

[mrray13 30]

ok...

update...

bottom and back of the box were soaked all the way through

wood is definatly warped...

the cut out from the sub was a little too big. due to some bad drilling on my part i can't use all the skrew holes. due to the round basket and the extreme weight of the h2 i have a nice air leak at the top of the cutout.

conclusion...

weight till summer. get new car. get new box.

my expression...

expect some in the box port sometime tomorrow...

was the cutout too big from the start?

man that sucks about the waterleak...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Twitch 0]

yah it was too big from the start. it was mostly fine till the 2nd time i tried to put the sub in

my porn for the day may have to be cancelled on account of the rain

[mrray13 30]

yah it was too big from the start. it was mostly fine till the 2nd time i tried to put the sub in

my porn for the day may have to be cancelled on account of the rain 

u should've said something man..

now i feel bad..

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Twitch 0]

its all cool

i was planning on getting a new box anyway...

now i have an excuse...

but i mean if you wanna replace it

i wanted to get it ported so with 2 tones so i could plug one and then use one if i decide to compete.

which i'd like to try this year.

[mrray13 30]

its all cool

i was planning on getting a new box anyway...

now i have an excuse...

but i mean if you wanna replace it       

i wanted to get it ported so with 2 tones so i could plug one and then use one if i decide to compete.

which i'd like to try this year.

well, hopefully, i'm not out of the new box picture

when u get ready, gimme a chance...i'll cut the baffle right!

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Twitch 0]

will do...

maybe i can take some lessons also

[mrray13 30]

will do...

maybe i can take some lessons also

awesome, just let me know..

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Twitch 0]

i believe i'm gonna need a small ported box for my new 10" 187s

i may go to the local dealer and just buy a prefabed though

depending on price he wants to try to rape me with

so what you think on a small box to specs 28hz?

with correctly cut baffles

[mrray13 30]

i believe i'm gonna need a small ported box for my new 10" 187s

i may go to the local dealer and just buy a prefabed though 

depending on price he wants to try to rape me with

so what you think on a small box to specs 28hz?

with correctly cut baffles

ygpm

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee :peace:

[Twitch 0]

i think i'm gonna give this one a try...

i do believe now that i can get my hands on all the tools i need.

the only thing i don't know how to do is figure out the port

and how to construct it

[mrray13 30]

when u get ready...lemme know

i'll help ya get it designed...no charge (make up for the baffle)

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Twitch 0]

:.:

[Twitch 0]

how much volume do you think a 28 hz port will take up?

for external measurements as of now i'm looking at

h - 14

w -13

l- 34.5

thats 2.5ft^3 before sub displacement.

after 2.41

now i have to figure out how to port

and thats where i need you expert advice good sir

[mrray13 30]

how much volume do you think a 28 hz port will take up?

for external measurements as of now i'm looking at

h - 14

w -13

l- 34.5

thats 2.5ft^3 before sub displacement.

after 2.41

now i have to figure out how to port

and thats where i need you expert advice good sir 

i wouldn't tune it to 28hz....the fs of IA 187's is right at 34hz...u tune lower then that, u won;t be hearing it anyway..i'd suggest 37hz, plenty low, whil still giving ya spl...

box is designed...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Twitch 0]

i'll go with your suggestion for 37 hz.

i'm anxious to see what you have for me

and i do wish you'd be on aim more often

i would still like to know the equation that you use to figure the tuning design.

i checked that website that tells you everything. but i couldn't find any helpful information on the subject for myself.

i'm planning on doing all the construction myself

and i'm also going to redesign a box for the h2 seeing as this one has severe water dmg and the sealent has leaked out of the bottom cornor. and i'll soon have a new car to play with for awhile.

[mrray13 30]

i'll go with your suggestion for 37 hz.

i'm anxious to see what you have for me

and i do wish you'd be on aim more often

i would still like to know the equation that you use to figure the tuning design.

i checked that website that tells you everything. but i couldn't find any helpful information on the subject for myself.

i'm planning on doing all the construction myself

and i'm also going to redesign a box for the h2 seeing as this one has severe water dmg and the sealent has leaked out of the bottom cornor. and i'll soon have a new car to play with for awhile.

aim is on...

i don't use a calculation..i'm too lazy... i use bb6p...a program.....

i'll get it drawn up and sent over to ya...

sucks the h2 got water damage...but u can take it apart and see how the port is made..

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Twitch 0]

the box is complete pictures wil be uploaded in just a matter of time!

http://groups.msn.com/picquersts/caraudio.msnw?Page=2