re mt18 specs?

[slam 0]

Wondering if these specs on this sub is available. its a dual 1.1

Electrical Q Value -Qes: ??

Mechanical Q Value -Qms: ??

Total Speaker Q Value -Qts: ??

Free Air Resonance -Fs: ?? Hz

Equivalent Compliance -Vas: ?? liters

One-Way, Linear Excursion -Xmax: ?? mm

Efficiency -SPL 1W/1m: ?? dB SPL

Effective Piston Area -Sd: ?? cm^2

DC Resistance -Re: ?? ohm

Nominal Impedance -Znom: ?? ohm

Thermal Power Handling -Pe: ?? W

Force Factor -Bl: ??

[USAMPFREAK 4]

No such thing as t/s parameters on the MT's way to many configurations to have set parameters.

[BKOLFO4 29]

Even if you had the specs, you more than likely would not like how they model up.

Run them in 6.5-7.5 ft^3 tuned to 35 hz for daily. Each one on a 40.1 will be awesome.

[slam 0]

Even if you had the specs, you more than likely would not like how they model up.

Run them in 6.5-7.5 ft^3 tuned to 35 hz for daily. Each one on a 40.1 will be awesome.

actually..... all on 16v too

this is not going to be a daily

[BKOLFO4 29]

If not daily, who needs t/s parameters?? Test and tune is the only way to get max SPL. . .

[slam 0]

oh thats cause only 3 are going in an spl vehicle. sorry for the confusion

[DeeCee 0]

use the BTL18 specs as a guide only.

[slam 0]

use the BTL18 specs as a guide only.

thanx