Icon 12" magnet diameter

[brocken 0]

Hi guys,

After lots of research I decided I'd really like to get the Icon 12. I'm most likely putting this in a prefabbed box so I need to make sure it will fit.

Does anybody have the magnet diameter for this sub? I see the mounting depth but not the magnet diameter listed on the product page.

Thanks!

[NB50 206]

I've posted it before, cant recall right off hand but I believe it is 6.75".

[NB50 206]

Looked for the post but found a tape measure on the desk instead, it is 6.75"

edit found thread. Icon Motor - SSA Car Audio Forum

[brocken 0]

Thanks!

I have a followup question. Would 1.25cuft be good airspace for the Icon?

My goal is more SQ than all out SPL

[NB50 206]

Is that 1.25ft^3 before or after the sub displacement?

[brocken 0]

Before sub displacement.

[NB50 206]

Should be fine, you could always add polyfill to make the enclosure appear bigger to the speaker.

[brocken 0]

Thanks! That's kinda what I was thinking. In addition to some of the pink stuff around the outside of the box.

[Aaron Clinton 2,372]

Thanks bromo for finding that info. I took those pictures a while ago, and those are of the last 1st gen Icon (still BNIB), but the slug dimensions have not changed.