Subwoofers / Speakers

Im wondering the best way to wire these speakers to my RF P300-2 I was thinking the 4x6's on 1 channel the tweeters on another but idk about the ohms But I want to make sure because Rockford is not cheap! Thanks for any input Tweet: http://www.sonicelectronix.com/item_18209_Rockford-Fosgate-P1T-S.html 4x6: http://www.sonicelectronix.com/item_19506_Rockford-Fosgate-Power-T1462.html amp: http://www.sonicelectronix.com/item_16058_Rockford-Fosgate-Punch-P300-2.html

Anybody use the/hear of them? http://www.splaudio.ca/splw.html http://www.splusa.net/index.htm Was thinkin about getting some 10s..

I am looking for advice on which 12" sub to buy, at the moment I am looking between the 12W7 and the 12" AA Havoc. Unfortunately, quality subs are fairly rare here in Australia, so I haven't listened to either (have listened to W6 and liked the sound of it). My current situation is a 10" Polk MM, mounted in a custom box I built, sitting on the center of the rear seats (in an Isuzu pickup truck so very limited space) but I will build a bigger box for the 12" and place it on the seat behind the drivers seat. For me to import either from the US will make the price very much the same, so that isn't really a major factor. I am open to suggestions of other subs too, around this…

My friend is looking for a SQ woofer for less then 200. Please list some that can handle atleast 800 rms.

For the longest time I ran my SPL15 inverted due to my box being just under 4 cubic feet net. I also made sure to reverse the polarity on my pioneer HU when I ran inverted . A few days ago I got bored and decided to mount the sub in the "normal" non-inverted fashion. HU sub polarity setting was set back to normal rather than reversed. The sub sounds much louder now and low end reproduction is much more powerful. I thought by putting the motor in the box would decrease net volume therefore raising the tuning a bit. Doing so seems to have had the opposite effect. Box is tuned to 37ish with sub mounted inverted. Can anybody explain why this happened?

So yesterday I was coming back from college and on the way I was blasting my music like everyday. 10 mins before I got home, I noticed there was no lows No burning smell at all. Which was weird... Today I checked and the subwoofer is not playing. I checked the speaker wire connections, nothing out of place. So I decided to use my DMM and read the coils, since I pushed the cone and it does not look or feel blown at all. I used my DMM and both coils give me no reading. 0.L on the DMM. I checked the coils and nothing seems burned, broken, out of place or moved. I have no idea what could have happened to the sub. Any ideas?

So I have been trying to contact FI by e-mail since I can't find a number and I am getting no response. Are they just really busy?

Whew! What a wait. Good news is I received a call from my shipper this morning telling me she has a crap-load of boxes with my name on it. It will be a couple of days before they land in my hands. Those of you who signed up for the SPL-15 pre-order, please shoot me a PM so I can verify my records. Best, Mark

I will be looking for 5.25's and a 4 channel amp, what do you guys think i should get? Can be more than 100, just the less the more i got for other things.

Hi all, I blew my old POS Kenwood after 3.5 years of beating the crap out of it, so its time for a new sub. My amp is a eD Nine.2 giving 400x1 @4 ohms or 200x2 @2 ohms. I need help choosing a new woofer that will work for my set up. I will be building a new box so ported vs sealed does not matter. Price is up to $250 for the sub. I would like to focus on SQ, but would like a lil SPL. I listen to hip hip/rap music so I need some deep bass fill to keep me happy. So far I am looking at the Image Dynamics IDQ, the Diamond Audio D3 and also the Sound Splinter RL-i. What are your thoughts on these subs? Are the others that you would recommend? Thanks in advance for any h…

This might now be exactly how the final version will look, but here's a peek at what I have sitting at my house.

Your subs used to be like 3xx shipped, the website says 5xx shipped. When did that happen? Are the new mags going to be towards that 5xx or 3xx? -Alex

I'm looking to get a new 12" sub, I will be porting the sub, and I want spl, what do you guys think, I am looking for the best sub for the money.

After installing the FI BL FL with a 1500zx, it has shown its power. My friend is looking to develop a system with Rockford Fostgate in mind. The T1500 or the T1000, I was looking for 2 SUbs 13"+ that would hit hard at 1 ohm, or if it is not stable at 1 ohm, something thats stable at 2 ohms. Also, could the Rockford Fostgate amps power 2 subwoofers but still give the rated power of wattage to each Subs? He dosent want to spend more then $1100 on the amp and subwoofer and installation. Amp Prices are: T1500 = $430 T1000 = $360 Installation being around $150 Leaving $520 To play with for the 2 Subwoofers. Thanks

i came across PAP WMD 18's for only 175 per on their website. does anyone have any input on these things? power handling? (says 1,000) weight? whats theyre best tuned at and box size? how they hit lows or are they straight comp subs? anything is appreciated cuz 175 for a normally 400 dollar woofer seems too low, or maybe something worth jumping all over

Hi guys. I currently am running a single Alpine SWX-1242D with a pdx 1.1000 in a 2.25 - 2.5 cubic foot enclosure in the back of my Hummer. I csn't remember what it is tuned to, as I got the design off of a forum a couple years ago. Unfortunately I haven't been able to get the ouput I want. I am not sure why, but there just doesn't seem to be enough bass. My input source is a Mac mini running to an Alpine PXE 650 with the Ant EQ, which has 4 volt pre outs. I also run a stock batt, with a yellow top optima in the back. Stock alternator and all power And grounds are 0 gauge welding cable. So since I can't firgure out the problem other than the box may not be right, …

hey guys! so im in a little stuck. im going to be gutting out my old system and throwing a 1cuft ported or maybe bigger (if i can) under the back seat of my truck. i just went to a shop and they had some demo cars with just one Avionixx amp i believe a 2800m series and one 12" Concept sub of some sort and sounded awesome. its not a crazy set up, but that sounded great to me.. SO has anyone heard of these two brands? i sure havent. would the above set up be any better then the audioque 1200 amp and 10" fi bl i plan on doing? thanks in advance for any info!!

Hi guys, I'm from Puerto Rico so my english is not that good, but I want to try to communicate with all of you. I know this questions is ask sooo many times. But I want to know your opinion on this. My car is a 1994 Corolla, the amp is a Soundtream Rubicon 400.1 mono, and the sub would be in a .75 birch ported box, about 2.89cuft including port area and tune to about 38hz and I listen to a lot of hip-hop, electronica, and rock(not at high volumes). The 15" subs I been looking are: Mmats P2.0, IA 187, Treo Tsx and Mtx TR75. All of them dvc 4ohms. I want the best ""SQL"" possible because I know that with just 400rms I'm not going to reach high SPL. I want …

May be a stupid question but i've heard people talk against the 15" for whatever reason and I was curious what you all thought. I'm planning on purchasing a single sub, either the 12" or 15". Are there any major differences between the two besides power use and loudness, or any reason against getting the larger version that I should know of. Thanks in advance.

hey guys i have a quick question i recently built a box for two zcon 12 inch subs. it consists of a single 6 inch aero tuned to 37 hz only 9 inches depth in a enclosure 5.46 after sub displacement it seems like the sub closest to the port is unloading or sounds Blown at frequencies higher then 40 hz but the one on the left doesn't do this.. could it be the encloser is causing the sub to unload and sound distorted? i had designed a different box which would be a slot port with these specs gross volume 6.98 ft^3 port volume : 1.43ft^3 physical port length 20.00" port bends : no Baffle displacement : 0.19ft^3 port area range 60-80in^2 port area 81in^2 port area per ft: 16.2…

hi i am just wondering what amp i should get for a fi q 12 fully loaded which im going to order very soon. my choice so far: planet audio BB1400.1 ALSO ANOTHER THING WHEN I ORDER MY FI Q12 SHOULD I ORDER IT DUAL 1 OR DUAL 2, which would work best with the classD monoblock amp ? P.S. im a newb. thanks. -Patrick

So things are happening tomorrow (Saturday August 25). Here's hoping folks can make it out. Club Regent Casino parking lot. Comp starts at noon; registration from 10:00am to noon.

Soon I will be getting an SUV, and I need some ideas. I want some loud bass thats impressive but not like competition grade i guess. My idea for a setup is Enclosure: http://store.soundsolutionsaudio.com/products/ported-dual-12-subwoofer-enclosure.html Amp: my current amp, 1700 rms at 1ohm. Subs: maybe 2 SA-12s wired to 1ohm. I was wondering if maybe 2 Gcons or Icons would be better in that box, or maybe two sealed SA-15s in a different box. Or one sick 18 sealed, just help me out here. Im trying to save space and dont want a huge box. Just send me some ideas please. I just want the most bass for my space, and money.

Unfortunitely I need to build a new home for my XCON 15. The current enclosure is 4^3ft net tuned to 32hz. I love it. The output is good and the sound quality is great. BUT!!! I need to get some cargo area back. After tossing around a few ideas I decided to sick with my XCON but build a 3.0^3ft sealed enclosure for it. I am really going to miss the ported output How much polyfill should I add in the enclosure? Will the sub still handle 1750wrms daily?

A drill went through my subwoofer (foam surround, not the actual subwoofer) while taking it out of its enclosure. The hole is about an inch long, what do I need to do to fix it? Is there some sort of kit I can buy, if so where at?