Enclosure build "single T212D4"

[Thumpper 266]

dayton audio solder, hmmmmm nifty

the stuff is awsome,it has a good % of silver in it..the only

problem is it has a very high melting temp...you NEED a really

good soldiering gun for this stuff

[Thumpper 266]

what does it Meter @ ???

i need a table saw

Great build

I'm not shure if he will compete with this box at all so it may

never get metered

it is tuned at 32hz..more of an SQ configuration than anything

but it will be damn loud

[Erotomania 0]

When you flare the port out like that, do you measure the length of the port the same? or from the start of the flare or what? Always wondered that.

Also, Just curious, when you are building a smaller airspace box, does the port have to be longer for a certain frequency than a larger box? My box has a large opening, but according with WINISD the length was very short and the box was 10cubes.

[Thumpper 266]

When you flare the port out like that, do you measure the length of the port the same? or from the start of the flare or what? Always wondered that.

Also, Just curious, when you are building a smaller airspace box, does the port have to be longer for a certain frequency than a larger box? My box has a large opening, but according with WINISD the length was very short and the box was 10cubes.

I have a formula I use for my port flares

and the port length will change with more or less port area..I build all my

enclosures with a low percentage of port velocity so the ports always

end up big azz