mtx 1501d...

[mrray13 30]

i wonder if it will be ok with a 1.3 ohm load...

a friend wants me to put three single 4 pr12's in his x-cab ranger, he already has the mtx....so what do ya think??

1.3 close enuff to 2 ohm to be alright??

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Peteyglad 2]

After the box impendance rise I think you will be ok. But don't quote me

[Tirefryr 1,742]

I agree.

[mrray13 30]

that's along the lines i was thinking, and telling him. i just wanted a touch of reassurance...lol..

we will find out over the next couple of weekends..hehe

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[XTRMEASURES 0]

I agree.

<{POST_SNAPBACK}>

X2

jamie

[Iggster 0]

I believe they are made to be ran at 1ohm so you should be just fine.

[AudioStylz 0]

I believe they are made to be ran at 1ohm so you should be just fine.

<{POST_SNAPBACK}>

As he said. I have ran the MTX 81000D at 1 ohm for months on end and never had a problem. It gets a little hotter then usual and easier to clip (just like the JBL 1200.1) but it was fine. My MTX 81000D only fried on me because of a really bad voltage drop in the middle of a burp at meca world finals last year. Expensive weekend for me that year.

[mrray13 30]

hey,hey..update..lol

he actually had 3 dual 4 pr's (picsof install in showoff section)

so he's runnin at 2.6 ohms..which is better for the subs anyway as they are only rated for 200wrms a piece...lol...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee