Need help with specs for some MTXs

[Aaron Clinton 2,372]

there is no information on their site,

anyone know where I could find the info or who to email?

I want to put these in a box up against the incomming 4 Funky Pup 8s

[Tirefryr 1,742]

Second Gen Blue Thunders. Nice pick! If you have an exact model number, I can get you the info. If not, I'll have to give you the specs on every BT driver.

[Aaron Clinton 2,372]

Second Gen Blue Thunders.  Nice pick!  If you have an exact model number, I can get you the info.  If not, I'll have to give you the specs on every BT driver.

I dont have an exact model number sowwie, me =

[Tirefryr 1,742]

Nothing anywhere? Should start with BTL or BTW.

[Aaron Clinton 2,372]

Nothing anywhere?  Should start with BTL or BTW.

all I know is that they are SVC 4s

[Tirefryr 1,742]

[Aaron Clinton 2,372]

damn you got it on expert mode

[Tirefryr 1,742]

damn you got it on expert mode

[Aaron Clinton 2,372]

damn you got it on expert mode

so about what do you think I should do box wise for ported with these suckers?

:sterb104:

[Tirefryr 1,742]

No idea, I didn't get that far. I'll plug it in though.

Just the 2 of them? Power?

[Aaron Clinton 2,372]

No idea, I didn't get that far.  I'll plug it in though.

Just the 2 of them?  Power?

the power will be low, nothing more than 500 watts, I would dig through my pile of RF amps sitting around here

[Tirefryr 1,742]

Everything you need.

[Tirefryr 1,742]

Okay, why is it not including my attachment?

[Aaron Clinton 2,372]

Everything you need.

huuh?

[Tirefryr 1,742]

Try this.

That's as big as I can get it. Won't let me add any attachments so. . .

[Aaron Clinton 2,372]

that say 1.25 cubs at 38.55hz? for spl?

[Tirefryr 1,742]

1.25 @30.55

They won't handle 500 in that enclosure though. At least as far as the graph said. 300 was the max before cone displacement got out of control. Are you burping them?

I know nothing about SPL, so that's not what I was looking for. If you want a higher tune, let me know, I'll throw that in, or more port area.

[Aaron Clinton 2,372]

1.25 @30.55

They won't handle 500 in that enclosure though.  At least as far as the graph said.  300 was the max before cone displacement got out of control.  Are you burping them? 

I know nothing about SPL, so that's not what I was looking for.  If you want a higher tune, let me know, I'll throw that in, or more port area.

oh these are not for competition don't worry, I could put my RF 250a2 on them and give them about 160 (approx) each @ 4

and thats 1.25 per right? do you know the length of the port? I would be doing a slot port for these like I did for the H2

[Tirefryr 1,742]

12.25sq." @ 27.39"L

The 1.25 is the NET for BOTH drivers and port.

[Aaron Clinton 2,372]

12.25sq." @ 27.39"L

The 1.25 is the NET for BOTH drivers and port.

sweet now I just need to figure a cut sheet and I am off to Home depot

[Tirefryr 1,742]

12.25sq." @ 27.39"L

The 1.25 is the NET for BOTH drivers and port.

sweet now I just need to figure a cut sheet and I am off to Home depot

Give me your maximum dimensions and I can plug that in there too. I can fit something in.

[mrray13 30]

she needs to be no large then, ummmmm

38d,28,36 about 5'6"..

oh hell...wrong thread

my bad...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Aaron Clinton 2,372]

12.25sq." @ 27.39"L

The 1.25 is the NET for BOTH drivers and port.

sweet now I just need to figure a cut sheet and I am off to Home depot

Give me your maximum dimensions and I can plug that in there too. I can fit something in.

this will be tested in my explorer so there is no limit essentially for 2 tens

[Tirefryr 1,742]

12.25sq." @ 27.39"L

The 1.25 is the NET for BOTH drivers and port.

sweet now I just need to figure a cut sheet and I am off to Home depot

Give me your maximum dimensions and I can plug that in there too. I can fit something in.

this will be tested in my explorer so there is no limit essentially for 2 tens

Those were 10s? I thought they were 8s. NM then, I have the wrong drivers. Back to work I go. Dammit!

[Aaron Clinton 2,372]

sorry I should have said that earlier