Are these good fuses?

[rumproast789 0]

Are these any good? the amp I'm getting, an AQ2200d requires a 200 amp fuse, and im using 2/0 welding cable so i figure il ljust get five, best bang for my buck and in case any pop i'll have an extra

http://cgi.ebay.com/Tsunami-200-Amp-ANL-Fu...bayphotohosting

And for a fuse block/holder, should I use the typical screw down the cable, or should I get the ones that you use a wire terminal on each end and just touch the fuse together?

Have any suggestions on some? I need 2 affordable ones, but 3 if they are REALLY affordable.. I'm not trying to cheap out, but I just don't think its necessary to spend 75$ on three fuses...

(since I'm using 2/0 thats why I'm wondering because most are 0 guage fuse holders)

Edited February 20, 2009 by rumproast789

[rumproast789 0]

ehhh bump?

[B7L|BL4Z3R 4]

tsunami has been a good brand in my past for electrical

[rumproast789 0]

tsunami has been a good brand in my past for electrical

sounds good, how bout fuses for wire bigger than 0 guage?

[Kanaworm$ 292]

Should be fine with your wire size.

Tsunami = Reputable company and quality products

[rumproast789 0]

Should be fine with your wire size.

Tsunami = Reputable company and quality products

Alright, I think I'm just going to order these then..

Should I step it up to 250 amp or no?

lol I still need help with some fuse holders!! Help a kid out

[Kanaworm$ 292]

Should be fine with your wire size.

Tsunami = Reputable company and quality products

Alright, I think I'm just going to order these then..

Should I step it up to 250 amp or no?

lol I still need help with some fuse holders!! Help a kid out

Snoop on eBay some more gotta be something on there for fuse blocks. Most are for 1/0 so you may just need to strip your wire down to fit the 1/0 gauge fuse blocks.

[rumproast789 0]

Should be fine with your wire size.

Tsunami = Reputable company and quality products

Alright, I think I'm just going to order these then..

Should I step it up to 250 amp or no?

lol I still need help with some fuse holders!! Help a kid out

Snoop on eBay some more gotta be something on there for fuse blocks. Most are for 1/0 so you may just need to strip your wire down to fit the 1/0 gauge fuse blocks.

Thats what I was thinking, but won't it really mess up the current flow?

[Kanaworm$ 292]

Nope. Such a small area will be trimmed down.

[rumproast789 0]

Nope. Such a small area will be trimmed down.

I found some trustworthy ones,

DB Link

http://cgi.ebay.com/IN-LINE-ANL-FUSE-HOLDE...DefaultDomain_0

I hope those will fit my fuses, I'll just order one then order another later to make sure it fits, or should i jsut order both