MHayes 2 Posted February 6, 2011 Ok so i have two motors that need reconed,i had Rusty(DC) do one for me and the coil rubbed. How do i get the measurements i need for the right coil? I do not have either coil that originally were in either sub,i do have a set of digital calipers. So what do i measure to get the correct coil?Thanks. 0 Share this post Link to post Share on other sites
Tirefryr 1,742 Posted February 6, 2011 You don't have the ability to measure it correctly, so you'll have to take it somewhere and have it measured. Even once you get the proper measurement, it doesn't guarantee you'll be able to get a coil that fits. Just keep that in mind. 0 Share this post Link to post Share on other sites
MHayes 2 Posted February 6, 2011 You don't have the ability to measure it correctly, so you'll have to take it somewhere and have it measured. Even once you get the proper measurement, it doesn't guarantee you'll be able to get a coil that fits. Just keep that in mind.So my best bet is to send it to fix my speaker? 0 Share this post Link to post Share on other sites
Tirefryr 1,742 Posted February 6, 2011 It would depend on the driver. I've never heard of Fix My Speaker. 0 Share this post Link to post Share on other sites
cheese20323 13 Posted February 6, 2011 It would depend on the driver. I've never heard of Fix My Speaker.its PSI 0 Share this post Link to post Share on other sites
cheese20323 13 Posted February 6, 2011 And what subs did these motors come from? 0 Share this post Link to post Share on other sites
MHayes 2 Posted February 6, 2011 And what subs did these motors come from?DD 3512c and Mmats Dreadnuat. 0 Share this post Link to post Share on other sites
Kanaworm$ 292 Posted February 7, 2011 Best bet would be to contact each company and see if they will re-cone them. 0 Share this post Link to post Share on other sites