Build help!!

[Brett_the_Vandal 2]

Okay. So I've got very limited trunk space. And a small-ish. Budget. I'm hoping for someone to help me with some sort of box design for an FI Q 10, in a ported box. Max dimensions being 30" Wide, 14" High, and 17" Deep. Already have an Amp picked out too that i'm gonna buy from a buddy for good.

[Deto1992 5]

Okay. So I've got very limited trunk space. And a small-ish. Budget. I'm hoping for someone to help me with some sort of box design for an FI Q 10, in a ported box. Max dimensions being 30" Wide, 14" High, and 17" Deep. Already have an Amp picked out too that i'm gonna buy from a buddy for good.

Go to the tech section and check out the ported designs for an icon 10. As far as I know, the Icon and Q are fairly comparable and a design for an Icon 10 should work with the Q.

[Brett_the_Vandal 2]

Thanks! Will do.

[Brett_the_Vandal 2]

The XMas on the FI is 8mm bigger than the icon. Problem? And most all of the other stats are remarkably different. like off by 5~9 each. Couple of them are close if not the same.