Is hole spacing the same?

[waltham415 0]

Simple noob question... I built a box for 2 10in DCON's but since they haven't come yet (day 8) can I throw my 2 old 10in alpine type-s subs in for now? will the spacing/distance for the screws be the same?

[burko 6]

I would throw them in and if the DCON's don't fit, fill'em.

[///M5 2,833]

Cutout is what you need to worry about. You can always rotate the driver

[ricksi30 923]

Both have 8 mounting holes and start at the very top of the sub. If I were you I'd mount the Alpines a little off center and you should be fine just dropping the dcons in, if not fill the holes. This is assuming that the cutout is the same for both subs.

Edited July 2, 2011 by ricksi30

[waltham415 0]

Wow, can't believe I didn't think of any of that...now I really feel dumb. but yeah, I cut out the hole for the dcon and the alpines fit so I'm assuming the cutout's the same. I'll throw them in off center just to give the box a run.

Thanks for all the help

Alex