Sound Solutions Audio (SSA®)

Currently have a 15" Xcon sealed at about 3.2 cubes which I've had on various power from a BC3500d, Kenwood KAC-x810d, JL 500/1, rf T5001bd and I loved it(still love it).... This was all in a '03 Camry with an upgraded mechman 320a ... My situation is now I have a new 2016 Mazda3 hatch.... I dont really want to do much audio wise yet besides at bass.. clearly much smaller space... My options I've considered: add in LOC so I can get audio to a low power sub amp or use my ZED mikro4 and bridge to a dual 4ohm sub 10" sub wise: downgrade to any 10" SSA sub and port.. aka Dcon, GCON, ICON, Xcon OR purchase basket and recone for Xcon 10" and put in some work o…

I'm posting a few pics from this build for a friend of mine that drives for aliving. He wanted some serious bass in the truck so i provided him with the subs. A local shop in Northern NY did the install, here's a few pics of it. Head Unit: Pioneer AVIC-N3 speakers: RF power 6.5 components Subs: SSA ICON 15D1s Amp: RF T20001, RFT 4channel

UPS guy just came and I managed to grab some pictures before I leave. 10" SSA Icon D2. Amp should be here tomorrow followed by knu konceptz wire monday. I'll post pics of those too.

I've been eyeing the Dcons for a month or two and now that the price was dropped I'm defineatly getting three. I just don't know if i want tens or twelves. My question is how much wattage is safe for them? I plan on running them with an Elemetal Desings Nine.1 at one ohm for 1200 watts. I know the Dcon's are rated for three hundred watts and my amp is underatted and with my electrical upgrades I'd be at 1400-1500 watts. With all that said should i just go easy on the gains or downgrade my amp?

How much port area would you reccomend for a 12" zcon in 3 cubes @ 30hz? Will be powered by a saz2500d.

I was just wondering what the difference is between the small enclosure size recommendation and the optimal size recommendation for the SSA subs? How is output affected by going with the optimal size vs the smaller size? Is is a noticable difference?

I recently picked up a used 12" SSA DCON and finally was able to find time to install it this last week. In this installation, I am running: Subwoofer: 12" SSA DCON single 4 ohm Enclosure: 2.00ft^3 tuned to 31Hz with a 4" aero port Amplifier: MB Quart DSC1500.1D at 4 ohms (375rms) I initially had low expectations, as this was my first single 12" installation. In addition, I have never used a low-power "entry class" subwoofer. After listening to this little guy for the last week, I must say that I am VERY impressed with its output and sound quality. I did a direct swap between a 15" Fi SSD and this 12" SSA DCON. The Fi SSD obviously gets louder, but the 12" SSA DCON is de…

What would be the best amp to power a pair of xcons for daily, thinking of going with mmats, anyone have any experience with mmats. open to all suggestions.

any body out there got a blown 12" icon willing to sell for $80 send me a pm

I finally hooked everything up in my suburban and it sounds even better than I thought it would. I have a 18" Xcon tuned to 35 hz. I have it hooked up to a JBL 1200.1 II and it is plenty of power for me. As far as music reproduction the Xcon is the best I have ever heard. I've played every type of music and it sounds ridiculously good on everything. When i turn up it literally feels like its hitting you in the chest. Its starts getting hard to breath on certain songs. lol. Props go out to SSA for making a Top knotch woofer!!!!!!!!!!!!!! When i get the wires and stuff cleaned up I'll put up some pics and maybe a video. Just a break down on what else Im ru…

I ordered my Icon 15 within the first 10 minutes of them being for sale, or something like that. box is going to be 3.08 cu ft after displacement. pretty much 3 cu ft tuned to 35 hz. Just got my 2 brand new soundstream amps this past week, PCA 2000d for sub, and PCA 2.260 for my JL Audio XR 5.25 components, also a brand new strand of KnuKonceptz Colosseus 1/0 power cable. =)) Building box, running power wire, and hooking up sub on saturday=) might start box sooner. BTW::: The ups tracking number still doesn't tell me when the sub will be arriving!!! I wanna be home when it arrives!!!! I talked to denim on caraudio.com, and please respond back to me. P.S. I really…

Dear SSA techies, I am going to be running my 15" XCON in a ~2.5^3ft sealed enclosure. I am curious if when the 15" ZCON is available will I be able to do a direct swap in my sealed enclosure? Thanks, edub

Updated Woofer, back to a Dome cap for improved performance, and updated look. http://products.soundsolutionsaudio.com/index.php/product-information/xcon.html

Trying to plan my system for when taxes come in. Trying to find out if I can fit two of these in my xb. Will be sealed cus I suck at making ported boxes and not sure if 2 sealed will fit or not. Measured the cargo area to be 7.49cf if I did my math right. Area was 38*20*17 for dimensions. Could go an inch or two higher on the height (20). Hopefully powered by a saz3000d. Dc 320 amp alt. Just trying to figure out how much to save up before taxes come. Also I would have to order d1 coils for that amp right?

This topic is just out of curiousity. Which of these would be louder? They should take up almost the same amount of space as eachother. The 4 dcon 10s would be in 1.25 cu.ft each tuned to 33hz and the xcon 15 would be in 4.5 cubes tuned to 33hz. I'm just thinking about setups I'd like to get in the future when I get a Rav4 or a Highlander.

I have been working on some killer new full page Ads for an upcoming Deep Hitters issue. Here is the first Team SSA ad.

is shipping free?

We just launched the all new SSA Icon. Check it out here: http://store.soundsolutionsaudio.com/products/icon-12-1250w-subwoofer-by-ssa-new-for-2018.html A nice mixture of a look back and an advance forward. Other sizes will join the 12 as funding allows.

I have a 98 s10 ext cab, have not chosen box specifications, or an amp yet. For the amp I'm thinking about getting a 1500 watt audiopipe. For the box I plan to go ported. Which would be louder and with deeper bass 2 12" gcons which are 750 rms or 1 12" icon which is 1250 rms?

Okay, for those running the Evil mids in an enclosure, how are you using them?

I managed to crack the dustcap on beloved OG blue cone Icon 10. I won't get into how I did it but it really has me pissed. I went and got a carbon fiber cap from Fix My speaker. My question....What harm would there be in just glueing the cf cap right over the original? I haven't weighed the cf cap but it feels like it weighs next to nothing. Would it throw off my parameters a lot?

We are considering doing a "trade up" program for SSA products. Loose details would include. Trade in your SSA product (SSA SUBS ONLY!) for a pre-derterminded value to be discounted off your new SSA product. Example: DCON trade (x-amount) - ICON MAP PRICE (y-amount) = total (y-x) This is just an idea at this point and we feel would help circulate our subs a bit better. We would also be selling the trade in's in our "Certified Used" Section on the shop after they have been tested. So seems to be a win win, you could get a great used product at a discount, or a brand new product at a discount. Let us know your thoughts!

So i looked and looked and couldn't find it. Are there any options for direct wire leads to VC instead of push terminals on Icons?

im sure mark and aaron youve heard it how does it sound? because yea just wondering. those are the subs im debating against