StreetLegal
Members
-
Joined
-
Last visited
Everything posted by StreetLegal
-
Welcome to ssa. -
Here is a design I did for an sa-12, it was designed to use more power to sub than it's actual rms rating. http://www.soundsolutionsaudio.com/forum/topic/56355-new-box-for-a-new-sub-1x12-advice-needed/
-
Not often you see an apology on any forum, koodos to you mann !!!
-
Very nce indeed !!
-
-
Welcome, awesome place to be !
-
-
Nice fella over at ca.
-
Ok guys lets all be friends here...
-
I would love to do an 18" if I had the space and money especially this one >>> LMS Ultra 5400 18"
-
-
The 45's not necessary, not much of a an audible difference. Wire it to 1 ohm ( too much work to re-wire lol ), set the gain appropriately and play it normally until you feel confident to crank it up bit by bit. I am a bit pressed on time or I would have done it in metric (cm), you can convert the measurements, a little bit off would not matter. Good luck on the build, you are welcome !
-
They can afford it .
Two 18" icon, that alone sounds awesome, welcome mann..
Yep you got it..
Something like this with one sub, but it may also turn at the back wall going up.
Rectangular port , 13'' x 3''
Check out the pre-designed enclosures here to give you ideas on your port http://soundsolutionsaudio.com/index.php/product-information/xcon.html It would be better for the port to run at the bottom of the box in the center, then turn on the back wall, as opposed to the corner, if the design allows it.
How much power you have available? Straight up.
Awesome work mann.. !!!
Ported if you have the space, sub up port back, slot port if you have the space if not then aero port, 2.75 cuft @ 34 Hz.
Yeah the budget could handle the Sundown 1500 Quality that much better? Yeah the budget could handle the Sundown 1500 Quality that much better? I would take the sundown way before the skar. The sundown will hold it's value better too.
If your budget will allow, go with sundown amps.