Help me out eh...

[SpeakerBoy 64]

This is my first post really, just lookin around for an upfiring, ported design for two 12" woofers, preferably tuned to 32Hz....please and thank you for any feedback on this.

Edited January 31, 2008 by DeepSubBoy

[ramos 2]

What drivers are you using ? It will make suggestions a lot easier . I have a three ring binder stuffed full of enclosure designs

[ANeonRider 3]

Vehicle would help too.

[ramos 2]

Vehicle would help too.

derr I left that part out Yeah that would help

[SpeakerBoy 64]

Vehicle would help too.

derr I left that part out Yeah that would help

you will prbably find me strange for this, but i will have the box in my room. a requirement i left out was it has to be able to fit through a door way. i am using the visonik drivers from this box: http://www.millionbuy.com/visvb212pkw.html

same amp too, if that matters

[johnecon2001 82]

OK... so it has to fit through a door with no dimensions. Cool. That should be easy.

[SpeakerBoy 64]

OK... so it has to fit through a door with no dimensions. Cool. That should be easy.

i am really confused as to whether that was sarcasm or not, so lets just say itz a regular 7 ft door way

[JimJ 11]

32Hz is way, way too high to be used in a room, IMO...

[johnecon2001 82]

OK... so it has to fit through a door with no dimensions. Cool. That should be easy.

i am really confused as to whether that was sarcasm or not, so lets just say itz a regular 7 ft door way

Go measure your door.

[SpeakerBoy 64]

32Hz is way, way too high to be used in a room, IMO...

alright....i was afraid to try it because it would b massive, but i would love to do 24Hz