Welcome to the IHoP

[JimJ 11]

Mike...

OK Mike...

[topgun 262]

I hadn't seen anything outa him for awhile, I wasen't even sure if he was still a mod. I guess I know now.

[Beat_Dominator 2]

Which mike? lol. DBfan? Admin's name is mike?? everyone over there is named Mike!

[topgun 262]

To many dang Mikes then...

[topgun 262]

My preamp is also a Mic amp...

*Just a little Mike fyi*

[Godsmack 360]

how about a nice mika???

J

[Beat_Dominator 2]

You have a mic pre? You doing Kareoke?

[JimJ 11]

Silly British and their component sets.

I'm thinking of putting the tubes back in the one monoblock I have here, opening the case on the new preamp and seeing if everything works well...so what if I've only got one channel here...

[topgun 262]

You have a mic pre? You doing Kareoke?

No, its just they way its made.

http://www.behringer.com/T1953/index.cfm?lang=ENG

I've upgraded the tubes in it aswell.

[Beat_Dominator 2]

You break one of your amps jim?

[Beat_Dominator 2]

No, its just they way its made.

http://www.behringer.com/T1953/index.cfm?lang=ENG

I've upgraded the tubes in it aswell.

<{POST_SNAPBACK}>

I see.....denial.

[topgun 262]

I need to get my arse out to the woodshop...

[topgun 262]

I wanted to go with a true tube preamp, but mines a hell of alot cheaper.

[JimJ 11]

Nah, needed to tweak the wooden base a bit, I built it a little too small and it probably would have seperated the miter joints over time. So I had to bring it back with me from B'burg and fiddle with it.

[Godsmack 360]

Whooosh................fire house!!!!

And it's gone!!!

J

[JimJ 11]

I wanted to go with a true tube preamp, but mines a hell of alot cheaper.

<{POST_SNAPBACK}>

I thought about going with a full tube preamp for mine, but...there's no getting around the fact that a AC-heated, tube rectified cathode follower is noisy. Especially with efficient speaks.

The nice thing about the Rogue is that it should be stone quiet...

[Beat_Dominator 2]

Werd.

[JimJ 11]

Hello JimJ it appears that you have not posted on our forums in several weeks, why not take a few moments to ask a question, help provide a solution or just engage in a conversation with another member in any one of our forums?

Blow me.

[JimJ 11]

Werd.

<{POST_SNAPBACK}>

Since I've gone with DC filaments in the monos, I'm never going back to AC again Hum? Lamination rattle? Whuzzat?

[Beat_Dominator 2]

I want to go out and use some cardboard to mock(sp?) up my trunk for my new install..... but it's hot and humid out there

[topgun 262]

WinISD online only figures round ports... fudge.

[Godsmack 360]

jimk u should give ue ur admin pass..........i'll jack alot of stuff up

[Beat_Dominator 2]

Werd.

<{POST_SNAPBACK}>

Since I've gone with DC filaments in the monos, I'm never going back to AC again Hum? Lamination rattle? Whuzzat?

<{POST_SNAPBACK}>

My HiFi News has a very interesting article on tube coolers/dampeners in it. He measured the resonance of the tubes (glass part I believe) and the best solution was to place the cage on the amps. Just like from the factory.

[topgun 262]

I'm thinking something along the lines 3 cubes at 40hz for quad 7" Dayton References to screw around with, I need somting to do with the 4 that I have and I wanna see what kinda output they would have.

[JimJ 11]

jimk u should give ue ur admin pass..........i'll jack alot of stuff up

<{POST_SNAPBACK}>

I only wish I had an admin account