Z15 Prototype Testing

[sundownz 197]

We did 148.6 on the first run but we didn't take a picture... got hot after a couple of burps so it went down a hair

We have four 1500Ds @ 2 ohms each on it, no clue on actual power after rise - but I think it would actually sustain more on a burp.

Not bad for my upcoming 1000-watt rated woofer, huh ?

[Mark LaFountain 1,054]

great score right there.

[sundownz 197]

Same box / setup as we test the Monster sub with - but we have the amps at 2 ohms each vs. 1/2 ohm each.

[P-Dizzle 1]

Z series. What are you owned by Pioneer?

[sundownz 197]

Z series. What are you owned by Pioneer?

Haha, no

Using the same letters as the amps...

I will have E, X, and Z series woofers when the lines fill out.

These are great sounding drivers too Dizzle, not just SPL

[jonbearsmt 919]

what class is the nightshade?

[sundownz 197]

what class is the nightshade?

It is it's own class

[jonbearsmt 919]

as they should be!

thay are killer subs jacob, the nightshades make me grin everytime i turn that little knob!

doin hair tricks with a trunked system!

i am gonna need to pick up those big boys when you drop them!

[P-Dizzle 1]

Z series. What are you owned by Pioneer?

Haha, no

Using the same letters as the amps...

I will have E, X, and Z series woofers when the lines fill out.

These are great sounding drivers too Dizzle, not just SPL

Frequency range?

Enclosure Specs?

[lee 2]

Z series. What are you owned by Pioneer?

Haha, no

Using the same letters as the amps...

I will have E, X, and Z series woofers when the lines fill out.

These are great sounding drivers too Dizzle, not just SPL

No ''S'' or ''A''

[80INCHES 0]

u know how i feel about this lovely piece of mechinary

80

[ABXX49 20]

Awesome, might have to look into these. Your company is going great places Jacob!

[sundownz 197]

Z series. What are you owned by Pioneer?

Haha, no

Using the same letters as the amps...

I will have E, X, and Z series woofers when the lines fill out.

These are great sounding drivers too Dizzle, not just SPL

No ''S'' or ''A''

Actually... I am working on an "SA" series

Just not going to go into too many details since I don't have any ETAs on this stuff yet.

[ford302redneck 15]

Boom.

[jbob 0]

Whatever happened to the X series?

[DeeCee 0]

Good job

[Biggy 0]

i'm just wondering

what number woulds the nightshade put on the screen with that setup?

[dre3k78 0]

Is this the Z series SQ line? Or is one of the other lines more designed for SQ oriented applications? Im wanting a couple Sundown SQ drivers badly for a sealed project in the near future.

[ford302redneck 15]

Is this the Z series SQ line? Or is one of the other lines more designed for SQ oriented applications? Im wanting a couple Sundown SQ drivers badly for a sealed project in the near future.

No.

There will be a line designed for SQ oriented.

I think its the X. Im not 100% though.

[sundownz 197]

i'm just wondering

what number woulds the nightshade put on the screen with that setup?

I would try it but they won't fit in my box.

I need to add a third layer to the top so the magnet will not hit my port

The "monster" sub is about 1" shallower than the Nightshade so it fits, as is the Z series.

[sundownz 197]

Is this the Z series SQ line? Or is one of the other lines more designed for SQ oriented applications? Im wanting a couple Sundown SQ drivers badly for a sealed project in the near future.

Z series is more of a flexible sealed / ported "good sounding" type driver - Qts and Fs specifications are similar to SI Mag v.3 (old version), similar internal motor geometry too

X series will be my sealed box SQ style driver - I took a different direction from earlier prototypes here

If you want a sealed SQ woofer right now I would suggest the SI Mag v.4

[dre3k78 0]

Z series is more of a flexible sealed / ported "good sounding" type driver - Qts and Fs specifications are similar to SI Mag v.3 (old version), similar internal motor geometry too

X series will be my sealed box SQ style driver - I took a different direction from earlier prototypes here

If you want a sealed SQ woofer right now I would suggest the SI Mag v.4

Ill just hold off until the X is released. I want to keep this an all Sundown project as much as possible. Hopefully it wont be long off...

[audioxtremes 0]

Where is the rear shot??? :D

[sundownz 197]

Where is the rear shot??? :D

* Z15 / Nightshade 15 side by side

[audioxtremes 0]

Another sexy ass from Jake. "Looks" similar to the old triple stack TC9 variant. I'm sure its not the same but I figured I would get it out of the way first.