Is this port wide enough

[Dutchie. 10]

2 12" type r's 1000wrms

Sorry about crappy pic, its with the cell phone.

Edited December 24, 2008 by Dutchie.

[NB50 206]

There is no way of telling that by the picture. Figure it out, Port area / total net volume = port are per volume. ie 60in^2 / 3ft^3 = 20 in^2 per Ft^3

general rule of thumb is to have 12-16 in^2per Ft^3

Edited December 24, 2008 by bromo

[Dutchie. 10]

There is no way of telling that by the picture. Figure it out, Port area / total net volume = port are per volume. ie 60in^2 / 3ft^3 = 20 in^2 per Ft^3

general rule of thumb is to have 12-16 in^2per Ft^3

I'll do some measurements, see what i come up with, Thank you.

[Dutchie. 10]

I came out to about 7 with that formula, i need to widen it from 4" to about 6.5"

[Duran 387]

I came out to about 7 with that formula, i need to widen it from 4" to about 6.5"

7 what? 7 square inches?

[Dutchie. 10]

I came out to about 7 with that formula, i need to widen it from 4" to about 6.5"

7 what? 7 square inches?

in^2per Ft^3

[Duran 387]

I came out to about 7 with that formula, i need to widen it from 4" to about 6.5"

7 what? 7 square inches?

in^2per Ft^3

Looks like you need to do some cutting

[Dutchie. 10]

I came out to about 7 with that formula, i need to widen it from 4" to about 6.5"

7 what? 7 square inches?

in^2per Ft^3

Looks like you need to do some cutting

Yes sir! after some measurements