Jump to content
Sign in to follow this  
quest51210

3-SS RL-i8's...Need amp suggestions

Recommended Posts

ok, so I set out to look for a pair of these subs and wound up with 3 of them. They arrive next week and I am starting to look for some options. I thought of selling one and running two ported off of 2-SQA-1's that I have, but I am increasingly liking the idea of running all three.

I have looked at the Audiopipe AP30001D which according to JBLCAMRY are good for 2600rmsx1@2ohms, but I have also looked at the new Soundstream Dtower which does 1400rmsx1@2ohms.

Just looking for suggestions and seeing where we go from here. I am looking for a great sounding, loud system, and I typically try to do things right the first time so that I do not have to have any worries for 2+ years. reliability is a huge factor and once I install something I usually do not like to upgrade later down the road. The reason I like the AP30001D is it is a lot of power at a decent price and definitely gives me headroom.

Share this post


Link to post
Share on other sites

4 ohm SVC? Those amps are a LOT of power for those subs. If they are 4 ohm SVC you will be running them @ 1.33 ohms in parallel. An SAE-1200d would be ideal for them. That will give you more than enough headroom

Share this post


Link to post
Share on other sites
sorry, they are DVC4's...I figured series/parallel I would be at 2.66ohms final load

You really don't need more than ~500w per speaker. So somewhere around 1500w (2000w at most) at 2 ohms should be fine.

Someone over here measured the AP30001 (actually the Massive P3000 but it's the same amp) at almost 3500w at 2 ohms actual load.

Share this post


Link to post
Share on other sites

I would choose one of those if I had 3 RL-i8s for a 2.66 load

http://www.woofersetc.com/index.cfm?fuseac...;Product_ID=378

http://www.woofersetc.com/index.cfm?fuseac...Product_ID=6667

http://www.woofersetc.com/index.cfm?fuseac...Product_ID=6990

However if you can up the budget, I would go with a SAZ 3000D which can be found for $600 or so used.

Hope that helps,

Kelvin

Share this post


Link to post
Share on other sites

Kicker 1500.1?

Share this post


Link to post
Share on other sites

Phoenix Gold 1200.1, I know the tantrum series does 1400+ @ 2-4 ohms.

Chad

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×