Fi SSD box

[The General 22 0]

I have 2 12" Fi SSD's with copper coils coming soon and I need a box for my Charger and found this.

http://cgi.ebay.com/2006-Dodge-CHARGER-SUB...%3A1%7C294%3A50

Would this box be ok to use or should I have a shop make one?

I also found a ported one

http://www.onlinecarstereo.com/CarAudio/Pr...ProductID=21319

I mostly listen to rap but also listen to rock, death metal, etc. if that helps

Edited May 8, 2009 by The General 22

[Aaron Clinton 2,372]

That box looks ok, but if you can afford it, it would be well worth having one of the custom builders on this site build you one specific to your install.

[The General 22 0]

Who do I talk to about that?

[JASON123 1]

Who do I talk to about that?

http://www.soundsolutionsaudio.com/forum/i...hp?showforum=80

http://www.soundsolutionsaudio.com/forum/i...hp?showforum=84

either one of these guys will help ya

[BKOLFO4 29]

For sealed, this is a VERY nice box:

http://www.parts-express.com/pe/showdetl.c...tnumber=260-648

For ported, this box is very high quality, but a little small net volume for me:

http://www.parts-express.com/pe/showdetl.c...tnumber=260-634

Brian

[hless421 0]

Would something like this work? I cheated by the way.

3/4 MDF 4.5 cu ft 32.8 hz before displacement

Width 34

height 18.5

depth 17

sq port height 17

sq port width 2.5

sq port length 13.75

sq port area 42.5

sq port diameter 7.35

total port length 18.25

i like to keep it simple so all cuts are 17"

top - 34

bottom - 34

left - 16.25

right - 15.5

front - 30.75

back - 34

port L1 - 13

Im thinking both subs in the same arispace. Some bracing couldn't hurt in the middle section.

[The General 22 0]

Would something like this work? I cheated by the way.

3/4 MDF 4.5 cu ft 32.8 hz before displacement

Width 34

height 18.5

depth 17

sq port height 17

sq port width 2.5

sq port length 13.75

sq port area 42.5

sq port diameter 7.35

total port length 18.25

i like to keep it simple so all cuts are 17"

top - 34

bottom - 34

left - 16.25

right - 15.5

front - 30.75

back - 34

port L1 - 13

Im thinking both subs in the same arispace. Some bracing couldn't hurt in the middle section.

I think 34" is about a half inch too wide for my trunk

[The General 22 0]

Who do I talk to about that?

http://www.soundsolutionsaudio.com/forum/i...hp?showforum=80

http://www.soundsolutionsaudio.com/forum/i...hp?showforum=84

either one of these guys will help ya

Thanks! I'll be getting in touch with them soon.

[SeductiveSounds 0]

Would something like this work? I cheated by the way.

3/4 MDF 4.5 cu ft 32.8 hz before displacement

Width 34

height 18.5

depth 17

sq port height 17

sq port width 2.5

sq port length 13.75

sq port area 42.5

sq port diameter 7.35

total port length 18.25

i like to keep it simple so all cuts are 17"

top - 34

bottom - 34

left - 16.25

right - 15.5

front - 30.75

back - 34

port L1 - 13

Im thinking both subs in the same arispace. Some bracing couldn't hurt in the middle section.

I think 34" is about a half inch too wide for my trunk

That 1/2" in width isn't going to impact the volume that much. It'll be like .07Ft3 of less space.

[The General 22 0]

Would something like this work? I cheated by the way.

3/4 MDF 4.5 cu ft 32.8 hz before displacement

Width 34

height 18.5

depth 17

sq port height 17

sq port width 2.5

sq port length 13.75

sq port area 42.5

sq port diameter 7.35

total port length 18.25

i like to keep it simple so all cuts are 17"

top - 34

bottom - 34

left - 16.25

right - 15.5

front - 30.75

back - 34

port L1 - 13

Im thinking both subs in the same arispace. Some bracing couldn't hurt in the middle section.

I think 34" is about a half inch too wide for my trunk

That 1/2" in width isn't going to impact the volume that much. It'll be like .07Ft3 of less space.

I meant my trunk is only 33 1/2 inches wide.