NightShade 12

[SeductiveSounds 0]

I'm looking for a jumping off point for a box size.

If someone would be able to help me out that would be great.

It's going into a S10 extended cab.

[CrazyKenKid 64]

i believe it is a 1.5 @ 33-35hz! if that helps! (i think ppl like to tune it at 35hz though)

[SeductiveSounds 0]

Really? that small eh.

Thanks, it gives me somewhere to start.

[sundownz 197]

Yes, they like SMALL boxes.

[SeductiveSounds 0]

Specs come in the box?

I'm expecting to get home and open up a box containing a NightShade.

I'd really like to get cracking on the enclosure for my customer.

[CrazyKenKid 64]

Specs come in the box?

I'm expecting to get home and open up a box containing a NightShade.

I'd really like to get cracking on the enclosure for my customer.

spec come in the box? like the specs i gave your? 1.5 @ 33-35hz?

and if you purchased a used motor sub i don't think you will get specs, i didn't get any specs in the box. hope this helps!

[SeductiveSounds 0]

I bought a new driver

It's for a customer

He wants a spec'd box, not something I design

What is a good alignment for an S-10 Pick-up?

I'm thinking sub up and port out the passenger side, thoughts and suggestions welcome

Edited June 1, 2009 by SeductiveSounds

[tezin87 0]

I think a lot of extended cabs like subs forward port up as well.

[Duran 387]

My 12's in 4 cubes are fantastic! Tuned to 35 hz. with 62 sq. in. of port.

[tezin87 0]

My 12's in 4 cubes are fantastic! Tuned to 35 hz. with 62 sq. in. of port.

What amp do you have on them again? Have you gotten a chance to get metered yet?

[Duran 387]

My 12's in 4 cubes are fantastic! Tuned to 35 hz. with 62 sq. in. of port.

What amp do you have on them again? Have you gotten a chance to get metered yet?

SAZ-3000D. No I haven't metered them yet.

[efxtruck 0]

I bought a new driver

It's for a customer

He wants a spec'd box, not something I design

What is a good alignment for an S-10 Pick-up?

I'm thinking sub up and port out the passenger side, thoughts and suggestions welcome

If you are using the whole Ext cab I would wedge it top firing port. If it has a solid back window