Adassa the Warlord...

[UpGradde 7]

Ok so I have an Adassa Audio The Warlord amp and I was setting the gains with a 50hz test tone and a dmm and right when I got it at 70 volts it started to fluctuate. It went down to 66v then 60v then 50 and so on. It got to the point where I turned up the gain 100% and it was only giving out 51v!! I shut everything down and waited a while because the amp was hot and when I tried to set the gains again it worked for a while (stayed at 70v) but then dropped back to 60v. I now think something is wrong with the amp. Has anyone heard of this problem? I am thinking about sending it to Chris at db-r.... opinions? Thanks!

[UpGradde 7]

Anybody? It still keeps doing it. Its like its losing output.... at least thats what my dmm's say. And it seems that from 0% to 30% the voltage on the speaker outputs goes from 0v to 5v on a 50hz test tone. That seems like a small jump.

[sqjeep 9]

first i would check/test the dmm. Also do you have the electrical to back up that the power you are drawing??