ATTENTION. people with grand prixs i need your help.

[2Loud 0]

hello ssa and people with grand prixs lol. i wanna but a 15 fi bl in the trunk of my 97 gp. but idk how i can make a big enough box but still fit in in through the trunk. people with gbs can i get some box dimentions please that would be great. thanks for veiwing.

[mariobjones 5]

I have two Ssa icon 15s in my grand prix bro!! In 3.2cuft each box!! I need too upgrade my shocks though!! It's a lot of extra weight!! I can get you some dimensions. How many cbft does it need?

[mariobjones 5]

People said it was impossible!! I can even fit them ported in correct sized boxes!! It just takes patience and dedicated.

[2Loud 0]

I have two Ssa icon 15s in my grand prix bro!! In 3.2cuft each box!! I need too upgrade my shocks though!! It's a lot of extra weight!! I can get you some dimensions. How many cbft does it need?

well fi recommends 3-5 cubs i want at least 3.5 cubes just for a lil wiggle room for displacement and bracing and stuff. that would be great bro! whats the biggest box do you think i could fit through the trunk? what year is yours?

[mariobjones 5]

FI BL specs

 

Fs: 33.6 Hz | 33.6 Hz

Re: 0.7 Ohms/coil | 1.4 Ohms/coil

Qms: 5.21 | 5.21

Qes: .28 | .28

Qts: .27 | .27

Mms: 261g | 261g

Cms: 0.86mm/N | 0.86mm/N

Sd: 810cm^2 | 810cm^2

Vas: 78.9 l | 78.9 l

Spl: 91.8dB 1W/1m | 91.8dB 1W/1m

Bl: 16.6 N/A | 22.7 N/A

Xmax: 18mm | 18mm

Rms: 1000W * | 1000W *

Sealed box: N/A cuft | N/A cuft

Ported box: 3-5cuft | 3-5cuft

Sub OD: 15.625” | 15.625”

Cut ID: 14.125” | 14.125”

Mounting depth: 8.250” * | 8.250” *

Displacement: 0.21cuft * | 0.21cuft *

You can do about 4cuft in the trunk ported!! My advice to you is not to make the box so tall.

[mariobjones 5]

I have two Ssa icon 15s in my grand prix bro!! In 3.2cuft each box!! I need too upgrade my shocks though!! It's a lot of extra weight!! I can get you some dimensions. How many cbft does it need?

well fi recommends 3-5 cubs i want at least 3.5 cubes just for a lil wiggle room for displacement and bracing and stuff. that would be great bro! whats the biggest box do you think i could fit through the trunk? what year is yours?

I have the 2002 40th anniversary one.

And I'm not sure how big of an single box you could fit, because mines are in different boxes as shown. It would be pretty difficult. But a rough estimate I'd do 3.5 ported because I know how tough it would be to stuff it in their. I wouldn't go bigger than that unless you build in trunk.

[2Loud 0]

FI BL specs

 

Fs: 33.6 Hz | 33.6 Hz

Re: 0.7 Ohms/coil | 1.4 Ohms/coil

Qms: 5.21 | 5.21

Qes: .28 | .28

Qts: .27 | .27

Mms: 261g | 261g

Cms: 0.86mm/N | 0.86mm/N

Sd: 810cm^2 | 810cm^2

Vas: 78.9 l | 78.9 l

Spl: 91.8dB 1W/1m | 91.8dB 1W/1m

Bl: 16.6 N/A | 22.7 N/A

Xmax: 18mm | 18mm

Rms: 1000W * | 1000W *

Sealed box: N/A cuft | N/A cuft

Ported box: 3-5cuft | 3-5cuft

Sub OD: 15.625” | 15.625”

Cut ID: 14.125” | 14.125”

Mounting depth: 8.250” * | 8.250” *

Displacement: 0.21cuft * | 0.21cuft *

You can do about 4cuft in the trunk ported!! My advice to you is not to make the box so tall.

damm those 1st gens? yea im thinking something like that im starting the build this weekend supposed to be nice out 50-60s lol.

[mariobjones 5]

FI BL specs

 

Fs: 33.6 Hz | 33.6 Hz

Re: 0.7 Ohms/coil | 1.4 Ohms/coil

Qms: 5.21 | 5.21

Qes: .28 | .28

Qts: .27 | .27

Mms: 261g | 261g

Cms: 0.86mm/N | 0.86mm/N

Sd: 810cm^2 | 810cm^2

Vas: 78.9 l | 78.9 l

Spl: 91.8dB 1W/1m | 91.8dB 1W/1m

Bl: 16.6 N/A | 22.7 N/A

Xmax: 18mm | 18mm

Rms: 1000W * | 1000W *

Sealed box: N/A cuft | N/A cuft

Ported box: 3-5cuft | 3-5cuft

Sub OD: 15.625” | 15.625”

Cut ID: 14.125” | 14.125”

Mounting depth: 8.250” * | 8.250” *

Displacement: 0.21cuft * | 0.21cuft *

You can do about 4cuft in the trunk ported!! My advice to you is not to make the box so tall.

damm those 1st gens? yea im thinking something like that im starting the build this weekend supposed to be nice out 50-60s lol.

Bro I'm from the south, that's borderline freezing for me lol... It's mid 70s low 80s here in Houston. With a light wind. This is nice lol.

But yeah these SSA icons first gens!!

[2Loud 0]

FI BL specs

 

Fs: 33.6 Hz | 33.6 Hz

Re: 0.7 Ohms/coil | 1.4 Ohms/coil

Qms: 5.21 | 5.21

Qes: .28 | .28

Qts: .27 | .27

Mms: 261g | 261g

Cms: 0.86mm/N | 0.86mm/N

Sd: 810cm^2 | 810cm^2

Vas: 78.9 l | 78.9 l

Spl: 91.8dB 1W/1m | 91.8dB 1W/1m

Bl: 16.6 N/A | 22.7 N/A

Xmax: 18mm | 18mm

Rms: 1000W * | 1000W *

Sealed box: N/A cuft | N/A cuft

Ported box: 3-5cuft | 3-5cuft

Sub OD: 15.625” | 15.625”

Cut ID: 14.125” | 14.125”

Mounting depth: 8.250” * | 8.250” *

Displacement: 0.21cuft * | 0.21cuft *

You can do about 4cuft in the trunk ported!! My advice to you is not to make the box so tall.

damm those 1st gens? yea im thinking something like that im starting the build this weekend supposed to be nice out 50-60s lol.

Bro I'm from the south, that's borderline freezing for me lol... It's mid 70s low 80s here in Houston. With a light wind. This is nice lol.

But yeah these SSA icons first gens!!

damn lol im from michigan its 40 right now. i love the first gens lol and do you have any vids of ur setup?

[mariobjones 5]

Not yet!! Been pretty busy. I have to find a bass spot. I need a better amp also, but it's pretty darn loud now.

[2Loud 0]

yea i kno how it feels been working 6 days a week and no time for anything but that big fat paycheck is so worth it lol

[mariobjones 5]

He'll yes!!!

I'll try do A video today!! Ordering a new hd camera on Monday, because I misplayed my old one.

[2Loud 0]

that would be great bro! gotta love when that happens

[mariobjones 5]

He'll yeah!! Why you decide to go with the FI BL?

[2Loud 0]

well my buddy just got the Q and i loved it and my bro has a 1st gen btl 18 and it makes my earwax fall out lol i just love FIs products very well built.

[mariobjones 5]

I used to have a 12 2nd gen btl and I gotta say that these icons sound better and get louder. But of course it was just 1 btl.

[2Loud 0]

I used to have a 12 2nd gen btl and I gotta say that these icons sound better and get louder. But of course it was just 1 btl.

yes ive only heard great things about icons. who knos i might just get one of those. idk lol i gotta alot on my mind.

[mariobjones 5]

I would like to be the first with an 18 in the trunk. In that case I'd get the FI btl n3!

[nick_19 1]

I've got a new Grand Prix (2006) but I will tell you this fact that I have figured out:

Using a flatter box with sub up and port on one side allows you to fit a much larger box in a trunk (my dimensions are 33 wide x 33 long x 13 high).

[spl_eddie 0]

I've got a new Grand Prix (2006) but I will tell you this fact that I have figured out:

Using a flatter box with sub up and port on one side allows you to fit a much larger box in a trunk (my dimensions are 33 wide x 33 long x 13 high).

nick, whats the best box design for a btl in an suv. i read some of your old stuff. what were your designs. ive been through about 4 boxes trying to get it right. help a brother out pls