Ported box help needed urgent :(

[Dice 0]

I'm really confussed on ported box tuning and sizes can anyone help me work out some measurements for my enclosure i have two ascendent audio havoc 18" subwoofers , and two Orion D5000 amps to run the subwoofers . The size of the space I have is 34high x 20" deep 53" wide  which is just over 17cuft i'f I've worked it out ok I would like the box 16 cuft and tuned for the lows because want to create hair tricks .

The design I would like so I can make into a wall build .

Help

[bassahaulic 155]

Do 14³ with 250²-270² of port with 38Hz-36Hz tuning. :-)

Will get nasty!

[Dice 0]

Sounds Awesome do you do designs ? I've heard 33 hz is a good one bit not sure i'f violent enough for a big hair trick I know these subs are good for them

[bassahaulic 155]

Sounds Awesome do you do designs ? I've heard 33 hz is a good one bit not sure i'f violent enough for a big hair trick I know these subs are good for them

I can. But I don't do well with sketch-up lol.

I'm tuned to 40Hz and do a nasty hairtrick with low power.

[Dice 0]

Sounds good I'm going to run them at 1250wrms each so loads of power !!

Could you give sketch up ago you would be a legend i'f you can I wouldn't know where to start or could you write dimensions on my image above ? Buy copying it would that work .

Ps you can tell I'm a newbie to ported

[bassahaulic 155]

I thought you were looking at 3k plus per woofer. Hmm

[Dice 0]

I'm running two D5000 orions so can just wearing them in at 1250