-
Recently Browsing 0 members
No registered users viewing this page.
-
-
Recent Topics
-
- 19 comments
- 326 views
-
- 3 comments
- 80 views
-
- 398 comments
- 33,435 views
-
- 4 comments
- 165 views
-
- 2 comments
- 741 views
-
- 5 comments
- 1,585 views
-
-
-
Similar Content
-
By SpeakerBoy
I'm having trouble getting the right mass to tune a PR enclosure
I got ~1200 grams when I used a calculator online but 158 grams when I used the mass of the air in the port as my starting point. I feel like i'm missing something.
i'm aiming for 8cu @ 26hz with a single 18" and two 18" PR's
What do I need to do to get the correct calculation? The reading seems straightforward but I keep getting these two opposing answers.
Thanks,
-Chris
-
By Omega_Ace
If you have two boxes at the same volume and say one had a 2" slot port width and the other had a 3.5" port width tuned to the same frequency would there be a difference? Would the 3.5" port allow you to feel the lows better than the 2" port but sound the same since they are tuned the same?
-
By bassthrashin
I would like some input on building an enclosure for 2 ZCON 15D2's. The max cubes available for the box is 7(3.5 per sub) after displacements. I want to tune at 31hz. I have seen the recommendations SSA's site for enclosures but would like to have some outside information on how well these will do in 7 cubes . They will be running off a SAZ3500 at .5ohms. Thanks.
-
-
Recent YouTube Posts