s10 box pics

[mrray13 30]

here's a few pics of a standard cab s10 install i did saturday..

it's a single 12" he2 bieng pushed by a modded profile california 1200..benched over 880wrms..in a 2.25ft^3 ported enclosure tuned to 34hz...

it's kinda cramped, but u can still get to the jack..hehe

also, this thing sounds great and hits hard as frock...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeee

Edited March 28, 2004 by mrray13

[mrray13 30]

first pic above was a trial fit....

here's one of the box done..but no sub....the lip off to the side will soon be the amp rack....

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[mrray13 30]

almost the same pic as bove..but with the sub in....

u can also see the port in the upper passanger side.(left side in the pic)

wheeeeeeeeeeeeeeeeeeeeeeeeeeeee

Edited March 28, 2004 by mrray13

[mrray13 30]

here's one in the truck..no seat.....but hooked up

u can also see how it goes around the jack...hehe

wheeeeeeeeeeeeeeeeeeeeeeeeee

Edited March 28, 2004 by mrray13

[mrray13 30]

from the drivers side....

wheeeeeeeeeeeeeeeeeeeeeeeeeee

[mrray13 30]

and finally...with the seats in.....

does this count as post whoring??!?!?!

hehehehhahaahhahehe

let me know what y'all think

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[mrray13 30]

well...one more....

passanger side of totally finished( for me anyway) set-up...

here u can see where the port is located..

man, i'm not shittin ya on how good this thing sounds and how loud it gets...it impressed my wife( in the above photo helping me cleanup)..and that ain't easy to do

wheeeeeeeeeeeeeeeeeeeee

[Below 30 0]

I like the custom fit wood work. That amp is looking large.

[mrray13 30]

I like the custom fit wood work. That amp is looking large.

that's cuz that amp IS large...hehe

2"tallx 10"widex 24" long!!

here is a link to the soundomain page i just put up for it.....

s-10 install

enjoy and don't forget to vote for it...

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeee

[Tirefryr 1,742]

Looks very good! Get a finish on that box though. I actually like that amp too. I like the finish and the clean lines. What about the front stage?

[Aaron Clinton 2,372]

looks great Kent, nice pix

[Qckrun 1]

Looks good bro, keep it up.

[mrray13 30]

Looks very good! Get a finish on that box though. I actually like that amp too. I like the finish and the clean lines. What about the front stage?

the owner's boyfriend wants to carpet the box...hence i didn't need to finish it.

as too the front stage...it's factory, being pushed by a sony cdx-m630 h/u with internal -xovers set at the 125 hz level. the factory 4x6 plates are so harsh i faded the h/u almost all the way to the "rear" 6.5's in the doors. the dash speakers add just enuff to enjoy the vocals clearly...

thnx for all the compliments...this truck really turned out nice, all the way to the surprising response from the sub and box! and i really like the way the amp rack turned out...with the amp being as long as the box is tall, there really wasn't much choice as to where it could go...so i ran it parallel with the rake of the box and flush with the baffle. all of it turned out better then expected!

and the old rf's do indeed kick ass!

one more thing....

can u guess it?

if ya guessed.......

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

(u was right..hehe)

[mrray13 30]

here's a pic of the sub being worked over while i was tweaking the thing...my son took this...

oh yeah...from start to finish....wiring, designing, building and installing....8.5 hrs flying solo......i think that it went pretty good..

wheeeeeeeeeeeeeeeeeeeeeeeeeeee