Jump to content

Recommended Posts

Picking up the rest of my pieces to complete this build today.

received_1038546467400962.jpeg

Edited by jcarter1885

Share this post


Link to post
Share on other sites

Finally got the battery/distribution block board, the amp board and a board to keep the box from sliding around.

20231230_105337.jpg

20231230_105346.jpg

20231230_105352.jpg

20231230_105408.jpg

Share this post


Link to post
Share on other sites

Vibration pads added to bottom of amp board and on to of the board where the sub amp mounts. Amp is mounted and ready for installation.

20231230_134719.jpg

20231230_134726.jpg

20231230_140209.jpg

20231230_140214.jpg

20231230_140225.jpg

Edited by jcarter1885

Share this post


Link to post
Share on other sites

Battery box/distribution block board was mounted to vehicle and the distribution block was installed. I need to find a way to bend some 2/0 terminals so I can finish up wiring the other side of this block.

20231230_144653.jpg

20231230_144657.jpg

20231230_155643.jpg

20231230_155649.jpg

20231230_155654.jpg

Edited by jcarter1885

Share this post


Link to post
Share on other sites

Mock up of batteries in their new home

20231230_142344.jpg

20231230_142348.jpg

20231230_142351.jpg

20231230_142359.jpg

20231230_143640.jpg

Edited by jcarter1885

Share this post


Link to post
Share on other sites

SWEET!

 

Share this post


Link to post
Share on other sites

Everything is installed and playing, I have some work to do on the wires in the back and I also need to change the crossovers on the new DC Audio mids. I ran out of time since it dropped from 61 degrees to 20 degrees in 2 hours yesterday. See how the 90 degree 2/0 terminals came in handy due to my space constraints. 

20240113_140454.jpg

20240113_140616.jpg

20240113_142913.jpg

Share this post


Link to post
Share on other sites

Rear batteries are fully wired up, 6 total ground wires and 5 total positive wires.

 

 

20240128_165145.jpg

20240128_170213.jpg

20240128_170221.jpg

20240128_170225.jpg

20240128_170227.jpg

20240128_170232.jpg

Share this post


Link to post
Share on other sites

20240128_174819.jpg

20240128_174838.jpg

Share this post


Link to post
Share on other sites

Some daytime photos

20240129_125727.jpg

20240129_125735.jpg

20240129_125739.jpg

20240129_125742.jpg

20240129_125746.jpg

Share this post


Link to post
Share on other sites

I received my new RCA's for my amplifiers, they are 2 channel and 3 ft each. I have 3, one leaving each output of my DSP and going to their respective amplifiers. I don't know why it uploads the picture upside like that, I tried to fix it.

20240130_183417.jpg

20240130_183306.jpg

20240130_183404.jpg

Share this post


Link to post
Share on other sites

Still breaking in but not bad for a single 15" out of the trunk.

20240205_171849.jpg

Share this post


Link to post
Share on other sites

Something is missing from this picture, no more Audio Control DM608 DSP.

20240304_185420.jpg

Share this post


Link to post
Share on other sites

Man I've been looking for a DSP but both versions are sold out everywhere. What happened to yours? This infotainment stuff is pretty new to me.

Share this post


Link to post
Share on other sites
12 hours ago, bigrank916 said:

Man I've been looking for a DSP but both versions are sold out everywhere. What happened to yours? This infotainment stuff is pretty new to me.

I personally would stay away from Audio Control, hence why I got rid of mine even though I did love the DSP. Audio Control sold it's company and the units are out of stock as of now. They have been having hella issues with software especially when you download there latest software update, which I didnt do since the 3 years I owned it. People have units with bugs and glitches, which I never experienced with mine. Audio Control was one of my all time favorite companies since back in the day when I had my Epic-160.

I had more issues with my Dayton DSP when I first got into the processing game which is what made me go to Audio Control DM608. I also talked to a reputable shop down here and they say Audio Control does something with the low end that they didn't like and even tried to sell me a Jl twk88 when I was calling about a Helix DSP, which the JL is cheaper than both so he wasn't just trying to sell me a product and actually saved me money by not going the Helix route since I'll never own a center channel speaker setup.

 

Sorry for the long post, just my experience with their DSPs.

Share this post


Link to post
Share on other sites
Posted (edited)

Look what came in today, I'll take more pictures later on and hopefully get the install started. 

 

20240308_143035.jpg

Edited by jcarter1885

Share this post


Link to post
Share on other sites
10 hours ago, jcarter1885 said:

I personally would stay away from Audio Control, hence why I got rid of mine even though I did love the DSP. Audio Control sold it's company and the units are out of stock as of now. They have been having hella issues with software especially when you download there latest software update, which I didnt do since the 3 years I owned it. People have units with bugs and glitches, which I never experienced with mine. Audio Control was one of my all time favorite companies since back in the day when I had my Epic-160.

I had more issues with my Dayton DSP when I first got into the processing game which is what made me go to Audio Control DM608. I also talked to a reputable shop down here and they say Audio Control does something with the low end that they didn't like and even tried to sell me a Jl twk88 when I was calling about a Helix DSP, which the JL is cheaper than both so he wasn't just trying to sell me a product and actually saved me money by not going the Helix route since I'll never own a center channel speaker setup.

 

Sorry for the long post, just my experience with their DSPs.

Well shit that makes sense why I can't find them anywhere lol. Thank you for that large piece of helpful info! I definitely don't wanna deal with any bs on the tech side. I'll just stick to the LOCs, Epicenter, and EQs then. Makes the potential game plan a bit different too.

I'm interested to see how the JL works out for you. It looks like quite the unit and JL been around for a while too. No worries about the long post. I appreciate the detail!

Share this post


Link to post
Share on other sites

I got the TWK88 installed and I will remove the RCA labels later aswell as clean up the wiring some more. I just wanted to get the DSP in and turning on for now, I'll tune tonight or tomorrow. 

20240309_115931.jpg

20240309_120149.jpg

20240309_120156.jpg

20240309_155923.jpg

20240309_162649.jpg

20240309_162653.jpg

Share this post


Link to post
Share on other sites

I removed the Stinger X RCAs and replaced them with Rhyno RCAs. Sorry I haven't cleaned up the wiring some but I haven't messed with this system since I installed the JL DSP.

Share this post


Link to post
Share on other sites

Daylight view of enclosure with lights on.

Share this post


Link to post
Share on other sites

Nighttime view of enclosure with lights on.

Share this post


Link to post
Share on other sites

I finally got my trunk light back working, had to do anjothenight video of the enclosure.

Share this post


Link to post
Share on other sites
On 2/5/2024 at 9:27 PM, jcarter1885 said:

Still breaking in but not bad for a single 15" out of the trunk.

20240205_171849.jpg

Good to see SSA in the build.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×