cutout size on the 18"BLs

[rcmobile 0]

just like it said up top, what size do i need to cut the holes for the 18" bls

thanks

[Grim 0]

16.75

i asked the same question lol. Apparently its on the subs page..and after looking again i found it...

[rcmobile 0]

that is what size i was thinking but wanted to ask to be sure. thanks

[rcmobile 0]

one other thing, if i wanted to flush mount on the top baffle, what size would that be

[Grim 0]

Well the bottom is 16.75 obviosuly but the top im unsure of...a tad over 18in. Im planning on doing that and im just going to measure it..thats your best bet...

[bamaboy 0]

i used my jasper to flush my 18s, but it wont fit in witht the rubber gasket, biggest on the jasper is 18 3/16

[Tremor1127 0]

make a temporary circle jig out of a clipboard for the 18+ holes.

[NDMstang65 403]

All of the info is on the site...

Sub OD: 18.500