Strapping 4 AXs 3200 DE

[thanosdbfan 0]

How can i strapp 4 of these beasts to a nominal 0,25 Ohm impedance on a single super battery only for burps?

I'm thinking of using them on my Street max 1-2 setup to replace my 2 USA 6000.

Is it safe?Has anyone done it?Is there any strapping diagram available?

[thanosdbfan 0]

How can i strapp 4 of these beasts to a nominal 0,25 Ohm impedance on a single super battery only for burps?

I'm thinking of using them on my Street max 1-2 setup to replace my 2 USA 6000.

Is it safe?Has anyone done it?Is there any strapping diagram available?

C'mon guys!Nobody? Not even a PM?

[platnum accord 0]

can you tell us more about your install?

[thanosdbfan 0]

OK...

2 MTs 18 DVC 0.9 OHM running by 2 USAMPS USA 6000.Each amp runs 1 sub @0.5 ohm nominal.

on a wall .

Street max setup (one ODYSSEY PC 2150 battery) 8 runs OO gauge wire on + and another 8 runs on -.

Car SEAT MARBELLA

Current certified score 160.1db @ 68 Hz...

[platnum accord 0]

well i dont think its possible yet to strap 4 amps togeather.

to strap 2 amps you should just go to the sundown thread as i believe jacob gives a very detailed way to strap his amps which i believe strapping them is about the same. or you could just pm flakko or w/e because he is the this forums mod.

[flakko 1]

with mlt you can strap 4 or as many amps as you want together, HOWEVER, I, never strapping an amp before, i would give greg@usamps a ring to see if you can run them at .25 ohms as well as how to do it.

877 AMP 9360

or his cell

626 833 2177

[thanosdbfan 0]

with mlt you can strap 4 or as many amps as you want together, HOWEVER, I, never strapping an amp before, i would give greg@usamps a ring to see if you can run them at .25 ohms as well as how to do it.

877 AMP 9360

or his cell

626 833 2177

Greg hasn't answered my e-mails...Need an answer fast!!!!Help!!!!

[flakko 1]

with mlt you can strap 4 or as many amps as you want together, HOWEVER, I, never strapping an amp before, i would give greg@usamps a ring to see if you can run them at .25 ohms as well as how to do it.

877 AMP 9360

or his cell

626 833 2177

Greg hasn't answered my e-mails...Need an answer fast!!!!Help!!!!

CALL CALL CALL!

[thanosdbfan 0]

Made contact! Thank you!