My 15" BTL on a kx2500.1 (videos and pictures)

[George 0]

This is my post from ca.com. i posted this over there and completely forgot to show love to the FI forum here . here it is though.

So as promised, here are some videos and pictures of the fully loaded btl 15". Also included are pictures of my electrical etc.

-Connected to a kicker kx2500.1 @ 1.4ohms , birthsheet states 2960 @ 2 ohms

-Gain set to give 3kw rms. impedance rise, music dynamics, etc etc will change that, but its set to recieve 3kw

-Its in 4.5^3ft @ 33 hz with 90^2in or port. box idea was basically stolen from ngsm13. yes i had to use a sheet of 3/4" Birch for the front baffle since i didnt want to buy a whole 4x8 sheet of mdf just to cut out that piece.

[platnum accord 0]

nicely done.

[George 0]

nicely done.

thanks, i appreciate it!

[ford302redneck 15]

How is your mean green?

Voltage drop at ilde? and 2000rpm?

[George 0]

How is your mean green?

Voltage drop at ilde? and 2000rpm?

http://www.caraudio.com/forum/showthread.p...reen+alternator

results are on the first page i think on post 8.

thats with my old 20.1 which has been benched to put out 2400+ @ 1 ohm. have not checked it with the kicker amp running. its a very solid alternator though so far (4 months).