A little lost

[Bobaflob 0]

What cables would i need to hook this Behringer CX2310 to this Behringer Ep2500, and what would i use as the source(ex. CD player).

[Bobaflob 0]

Think i solved the problem Cleanbox . Run rcas from reciever to this then xlr to amps and crossover?

[JimJ 11]

You can run XLR cables between the crossover and amplifier, you'll need XLR to RCA adapters going from the crossover to whatever you're using as a line level preamp. What are you using for the other amp(s)?

[Bobaflob 0]

I dont have anything in mind for the other amps and i am open to suggestions.Going for a simple 2 speaker setup also, and open to suggestions on speakers. Set up is for music.

[JimJ 11]

How much do you have to spend?

[dem beats 1,223]

I'm watching this thread. As soon as I close on my home I will be wanting to build a few different speaker set ups.

[Bobaflob 0]

Its not much but 400$ is my limit.(thats after the crossover,2500,and clean box)

[Bobaflob 0]

Was thinking of building a set of these BAMTM. Would they work well with the crossover listed earlier?

Edited June 19, 2008 by Bobaflob

[Robert_J 0]

The ART Cleanbox has a pretty steep roll-off on the low end starting around 35hz. Home Theater Shack has modification details.

-Robert