Modding an MA Audio HK4000D

[shizzzon 461]

Hey Scott, do you still do this for people?

I'm researching elternatives for boosting the amount of power i have in my car as i need maximum power at 2 ohms as my impedance curve shows that wired at 0.7 ohms, my lowest drop at full tilt is 2.21 ohms but at moderate levels, the rise drops down to 1.76 ohms so i would need an amp that is lenient or 1 ohm stable as you can see.

I know that you have modded these amps before and am sure that even if the procedure isn't 100% full proof, i shouldnt be stressin it as much as my rise is just a hair below the 2ohm threshold.

I'm still unsure on what amps to get for certain but this sparked my interest.

4,000w @ 2ohm total is beneficial but i noticed they do 3,600w and i would need 2 of these for 2 Audioque HDC3s.

I'm not interested in doing it soon or at all, just curious if you still offer to do this, that's all.

[scottiej 5]

Unfortunately no. I dont remember which 4 resistors need to be removed???

[cobracommander 0]

like this?

http://www.caraudio.com/forum/showthread.p...p;highlight=mod