distribution blocks....

[holley2346 6]

I have not been able to find an unfused distribution block for 1/0 gauge wire..... it needs to connect like 4 0 gauge wires.

[cshaw 0]

the cheapest and diy route is best. make yourself a copper bus bar.

[TOOLMAKER 0]

Something like this....

pretty easy to make with the right tools

[efxtruck 0]

Thats a good idea

[c0smo kram3r 0]

Here?

http://www.monstercable.com/mpc/productPag...mp;section=four

[PPDdawgg 0]

Try this on Ebay. I use this guy quite often and is very reputable.

http://cgi.ebay.com/Stinger-Gold-0-Gauge-T...id=p4634.c0.m14

[jonbearsmt 919]

or you can go old school... 1 lug.. or big ass screw.. and put rings all all wires. then screw it togather... if its gonna be hiden

[Adrian_D 520]

or you can go old school... 1 lug.. or big ass screw.. and put rings all all wires. then screw it togather... if its gonna be hiden

Old school for the win :bigclap: