15" Nightshade Box

[Jshak07 0]

Building a new box for my 15" nightshade. Going to be running (3) 4" external aeros and was thinking about ~2-2.5 cu ft before displacement.. Will be testin different port lengths after I get the box built to see what does the best. Any input?

[sundownz 197]

How much power ?

[bassahaulic 155]

Hopefully 3000rms of clean power. Lol

[efxtruck 0]

Hopefully 3000rms of clean power. Lol

What kinda of clean power is it a calss A-B

[bassahaulic 155]

Hopefully 3000rms of clean power. Lol

What kinda of clean power is it a calss A-B

noo...... :Doh:

A clean not distorted non clipped signal.

[efxtruck 0]

Hopefully 3000rms of clean power. Lol

What kinda of clean power is it a calss A-B

noo...... :Doh:

A clean not distorted non clipped signal.

So in other words you will be running the amp properly lol no offence

[bassahaulic 155]

Hopefully 3000rms of clean power. Lol

What kinda of clean power is it a calss A-B

noo...... :Doh:

A clean not distorted non clipped signal.

So in other words you will be running the amp properly lol no offence

And the H/U set properly, with good grounds/power, and wiring. then YES the "amp" properly

[efxtruck 0]

Hopefully 3000rms of clean power. Lol

What kinda of clean power is it a calss A-B

noo...... :Doh:

A clean not distorted non clipped signal.

So in other words you will be running the amp properly lol no offence

And the H/U set properly, with good grounds/power, and wiring. then YES the "amp" properly

nice it always better when the amp is running right. I blew lots of subs last summer because I didn't know my A$$ hole from my elbow lol

[Jshak07 0]

sundown 3000d! I hade Mike465 off ca.com build me a slot port of 3 cube at 36 hz but it only hit a 143.9 off a 38 hz tone so I am going with a different box design to see if it will get louder. Its a 3000d running off (2) deka 9a31, (2) runs of 1/0 and an exide orbital replacin stock batt.

[bassahaulic 155]

sundown 3000d! I hade Mike465 off ca.com build me a slot port of 3 cube at 36 hz but it only hit a 143.9 off a 38 hz tone so I am going with a different box design to see if it will get louder. Its a 3000d running off (2) deka 9a31, (2) runs of 1/0 and an exide orbital replacin stock batt.

Damn I'm good! lol :bigclap:

[Nightshade 0]

What kind of car are you putting it into? I'll give you a design that I guarantee will do over a 143.9

[Jshak07 0]

its a 2008 Ford Escape. Here is a link to my build

Jshak07 Build

[bassahaulic 155]

How do the Alpines like the 125.4?

I am in the market for ALL new speakers. And need something that sounds good and can take the power of my 100.4

[Jshak07 0]

It's only a 125.2, I am selling them and going to get some CDT or PG or something. They are only rated for 75 rms at 4ohm and the amp is rated 125 at 4 so I need some that can take some more power.

[rushnrun 14]

edit....

Edited March 10, 2009 by rushnrun

[Jshak07 0]

any suggestion?

[Nightshade 0]

any suggestion?

Do you want me to design you a box? If so pm me and I'll get started on it tonight.

[Jshak07 0]

I appreciate it but I can design one that will work I just didnt know if I should make it closer to 2 cubes or 2.5 cubes??

[Jshak07 0]

anybody??

[sundownz 197]

I wouldn't go smaller than 2.5 for the 15.

[warlock8600gt 0]

i built mine right at 3.66 cubes with two 4in. arrow ports tunned to 34hz :bigclap: and yes i can be herd before i am seen.