BL + Lows

[FiQZetecS 0]

Got my setup running yesterday and it hits the top end of the spectrum with ease I am finding the lows are a little lacking ? (16cuft wall, tuned to 30hz)

They are brand new subs and the suspension is super stiff, will playing them over time make the lows better ?

Reason bein my previous Re Mx install played the lows very well straight away.

[BKOLFO4 29]

Give them 30 minutes of good hard playing time and you should hear some difference.

MX is a totally different woofer from a BL. Not sure if you will ever get the same low end with BL's you had with MX's.

[superpuck13 0]

so the bl's arnt hitting any lows or just not with force?

[RobClay 20]

Really depends on the enclosure in your case on how well they like the low's.

[NB50 206]

What type of enclosure were the MX's in?

[FiQZetecS 0]

Mx's were 12's in 6 cubes tuned to 33hz.

BL's are 18's in a 16cuft wall tuned to 30hz.

[aznboi3644 2]

I blame the enclosure.

[dwright27 0]

you shoulda went with Q's.

they are made to play loud down low.

BL's are nice woofers though, but IMO they are more of a 40 hzish type woofer

[FiQZetecS 0]

I dont think it's the enclosure by any means it is totally reinfornced, fibreglassed inside and is virtually bullet proof.

Mind you speaking with then European distro for Fi/AA he says they need to loosen up before the lows start hammering properly.

Im willing to bide my time and try it.