reconing ?

[lilkman2202 0]

If i buy a d2 ssd but want to get it reconed can i turn it into d1?

I know on the BTLs you have to have the universal option but i havent really messed with SSDs before

[Julian 641]

the d2's can form a load of either 1 ohm or 4 ohms

d1's can only forum .5 ohms and 2 ohms

universal widens the gap so it can take either the 1 or 4 ohm load.

[lilkman2202 0]

i know this but say i buy a d2 subs and want to recone it. Can i swithc the impedence to d1

[deevstroyer 0]

so wait, i have a d1 fi btl.

and it is universal.

does that mean i can recone the sub to be a d2

or does that mean i can wire the sub to 1ohm already?

[hardrock2401 8]

A sub with the universal option lets you be able to recone to a different impedance, d1 to a d2.... or vice versa

[BKOLFO4 29]

I think all SSD's have the same gap. you can recone it to whatever you need.

For the BTL, the Universal gap is the D2 Gap. A D2 sub can be reconed as a D1, even if you did not select universal. A D1 can only be reconed to a D2 if you selected univeral.

[lilkman2202 0]

alrite thats all i needed to know thanks

[Fi Car Audio 64]

Copper and flatwound coils have different gaps. You cannot put a flatwound coil into a copper coil motor.

Outside of that if you have standard and copper coil motors then you can use either D1 or D2.

-Nick