Anyone come up with a new box for their new mag?

[ollie 0]

I am working on sealed for my 15 as we speak. Anyone come up with one that's 3.5 cubes at 27 that will fit in a trunk?

My box will measure

16 x 14.5 x 31.5 and end up being the 3 cubes after bracing and displacement

Just looking for other good ideas for a box that would work for me and maybe help others who haven't decided on what their doing yet.

and....

HOLY chit am i excited

i get a tomorrow...

[Upstage Audio 0]

yes i have, 3cu.ft common chamber box with a removal top baffle. Once you remove that baffle you can remove up to 4 different slabs in the enclosure to change the internal volume and chambers. So i could have 3 1cu ft chambers, 1 2cu ft chamber, 2 1.5 cu ft chambers and so on and since the top baffle is removal all i need to do if i test out different subs or setups is to replace that one baffle and not the entire box.

[80INCHES 0]

I GOT SOMETHING UP MY SLEEVE FOR 2 MAG 12'S

80

[ollie 0]

SOLID

anyone else?

[loserpunk 0]

man, i'm glad i have a truck, no problem fitting 3.5 tuned to 27, now i just need to grab a mag

btw, what is everyone using for power of their mags

[jntar 15]

man, i'm glad i have a truck, no problem fitting 3.5 tuned to 27, now i just need to grab a mag

btw, what is everyone using for power of their mags

<{POST_SNAPBACK}>

~300 to start with @4ohm, then ~1100@1ohm if need be.

[80INCHES 0]

the design i havei can use 2500watts on 2 mag 12's

80

[logikalliquid 0]

The largest box I can fit through my trunk is 17x17x35 which leaves me with a 3.3cuft tuned to 30hz with ~45sqin of port area. I think I might just go sealed. I've got a PG Tantrum 1200.1 to power it.

[ollie 0]

memphis 16.mc1000d

300 at 4 ohms

1100 at 1 ohm

i wish i could fit ported, but it doesn't look like i can

btw....

i got my mag today at noon

hehe

[jntar 15]

memphis 16.mc1000d

300 at 4 ohms

1100 at 1 ohm

i wish i could fit ported, but it doesn't look like i can

btw....

i got my mag today at noon

hehe

<{POST_SNAPBACK}>

Punk

I am using the same amp

[splblazer98 1]

autotek mm4000.1 for 2 12s lol

[jntar 15]

autotek mm4000.1 for 2 12s lol

<{POST_SNAPBACK}>

Thats gonna be loud.

[Electrodynamic 2]

btw....

i got my mag today at noon

hehe

<{POST_SNAPBACK}>

Yeah, Ollie called me today (Sunday BTW ) to ask me what size screws I used. We honestly just grab what ever we have laying around at the shop.

Speaking of which, you should have heard the driver by now Ollie. How about giving the forum and little review??

[ollie 0]

btw....

i got my mag today at noon

hehe

<{POST_SNAPBACK}>

Yeah, Ollie called me today (Sunday BTW ) to ask me what size screws I used. We honestly just grab what ever we have laying around at the shop.

Speaking of which, you should have heard the driver by now Ollie. How about giving the forum and little review??

<{POST_SNAPBACK}>

my bad nick, i was in a bind and needed a quick answer. i went with the 8's like you said and i've been driving around for the past 4 hours in the dissan.

now for a review in a new thread...