Will Someone check these enclosure dimensions.

[caintrain 0]

Wood Thickness 0.75

Height 30

Width 38.5

Depth 15

Sub Displacement 0.42

Port Height 28.5

Port Width 3

Tuning Frequency 32

Port Length 29 3/16

I get Around 6 Cubes at around 32 hz, after sub and port displacement...i just want to be sure they are correct.

thanks.

Edited August 24, 2010 by CainTrain

[shizzzon 461]

i just checked and u are right!

[shizzzon 461]

i will add u might want to add some dowels inside for bracing since u are only using single layered wood for such a large box

if u are worried about displacement, u can make the port 30" long to compensate or keep it the same length to tune at 33hz

Dowels take up VERY little displacement.

1" in diameter is plenty.

Example- 1" diameter at 37" long - displacement is 0.017cuft for just 1!

[caintrain 0]

Yeah The Box is not for me...It is for two AA mayhems so im thinking double baffle and probably some dowel bracing...

the reason for the dimension check was I made a Box calculator in Excel and wanted to check it for accuracy for future box designs.

Thank you very much for checking it for me.