Sundown SAZ-2500d

[thauk10 0]

What is the lowest ohm the sundown SAZ-2500d can drop down to and still be stable?

[Duran 387]

It's warrantied to 1 ohm, but can drop much lower pending it has an electrical system to back it up.

[Julian 641]

It's warrantied to 1 ohm, but can drop much lower pending it has an electrical system to back it up.

And as soon as you drop it under 1 ohm it'll be voided.

[manrossdamn 57]

Dumb question but I'm pretty sure the answer is simple..

How do they know you've dropped an amp under 1 ohm?

Teach me somethingg!

[Duran 387]

Dumb question but I'm pretty sure the answer is simple..

How do they know you've dropped an amp under 1 ohm?

Teach me somethingg!

If your nominal impedance is 1 ohm, you have D2 coils and wire down to 1 ohm, there ya go.

[manrossdamn 57]

That's easy stuff.

I meant.

How does Sundown or any audio company know when you've dropped the amp under 1 ohm.

Parallel and series wiring is all easy

[Julian 641]

Well, when you drop something down each impedance the output voltages raise on the mosfets ( I believe) they only handle a certaint amount, when you drop it lower they can only take so much.. So they blow.. And it's a easy thing to see

[manrossdamn 57]

But say you run it at .5ohms or something low and it doesn't blow or nothing overheats, then what?

I just want to know cause I'm running a dual 1 Q at 2 ohms and I don't want to drop it at .5..

[Duran 387]

But say you run it at .5ohms or something low and it doesn't blow or nothing overheats, then what?

I just want to know cause I'm running a dual 1 Q at 2 ohms and I don't want to drop it at .5..

Then your fine, it really decreases the life of the amplifier though

[manrossdamn 57]

Ohh, I see.

Thanks for clearing that up