SAZ-3500D v2

[On3Hundr3dProof 19]

So i got my 3500 v2 and hooked it up (post pics in just a min) im planning in running it on my SA-8 v2s for now @ 4ohm until i get my 0ga and mojos in. it should be be fine cause its not pulling more current than 4ga can handle right? also i ran it at 1 ohm for a moment and carefully increased the volume and i realize its not any louder than my saz-1000d was and watching my voltage im not getting any drop at all at idle. could there be something wrong with why its not pulling any more current than my saz-1000d was assuming it should be pulling way more? just confused at why.

[OuTLaWeD 110]

its probably having trouble pulling power through that tiny ass write. try breathing through a straw

[On3Hundr3dProof 19]

i figure that but what im not understanding is if its trying to pull more current shouldnt my voltage be dropping cause its staying right @ 15.0

[dbsupra 69]

You probably won't notice much difference at low/mid volume.  Also it's not like it puts out a ton at 4 ohm anyway.

 

Also remember power in to get power out.

[mlcantin 32]

That size amp needs 1/0 gauge bro to function to its full potential

[On3Hundr3dProof 19]

well heres the pics!