box for 15 bl PLEASE HELP!

[Julian 641]

what kind of enclosure am i looking for? i have a 1995 lumina, and now im seeing what kind of box i should go for. ( i have a very large trunk. ) i think my MTX JH55 is a 4 cube box. and i still have room for a little more, could someone post the exact and best enclosure for the FI BL 15?

and is there any very good box builder for xp or vista? also could i get exact specs for the 15bl with cooling, daily, universal, and a red dustcap.

ALSO would a hifonics 1200ixd amp wire at 1 ohm be ok to power this amazing sub?

[BKOLFO4 29]

Some maximum dimensions would help. . .like dimensions of the current box and how much larger it can be in each direction. . .

Brian

[Julian 641]

18.75 length, height 15.75, and width around 50 or 60

[BKOLFO4 29]

sub and port rearward I assume?

[ShaneSauce 2]

Well you will have no problem at all with room.

Go for 4.5 cubes @ 30hz to get a low low boom.

[Julian 641]

yes (told ya i got a big trunk ) sedan ftw

[Julian 641]

and is there a great box building program out there, i have bbp which doesnt tell me alot lol

[ShaneSauce 2]

Well all I did was use the 3D flash box program over at RE audio.

And my box turned out perfect!

[Julian 641]

i dont quite understand how to use the flash box calc could you do it for me or explain it? thank you 1 ohm btw

Fs: 35.1 Hz | 34.5 Hz

Re: 0.75 Ohms/coil | 1.5 Ohms/coil

Qms: 6.23 | 6.34

Qes: .47 | .43

Qts: .44 | .40

Mms: 232g | 240g

Cms: 0.089mm/N | 0.089mm/N

Sd: 810cm^2 | 810cm^2

Vas: 81.6 l | 81.6 l

Spl: 90.6dB 1W/1m | 90.7dB 1W/1m

Bl: 12.8 N/A | 19.0 N/A

Xmax: 21mm

Rms: 1000W *

Sealed box: N/A cuft

Ported box: 2.8-4 cuft @ 30-37Hz

Sub OD: 15.625

[JASON123 1]

if you find 1 let me know your box would be pretty easy i was looking at TurboBass Express