Quick Wiring Question!!!!

[imhungnurnot 9]

Alright i'm running 4 Dual 4 ohm speakers aiming for 2 ohms.

Theory #1:

Wire two subs in parallel separate (yeilds 2ohms a sub). Then wire these together in parallel yeilding 1 ohm total for 2 speakers. Then, wire the other two subs the exact same way yeilding two sets of speakers ran down to 1 ohm per set. Now im running one amp. Then run these two sets together in series on the amp yeilding 2 ohms. Only question, wouldn't this i swap the polarity in one set of the speakers???????

Theory #2: Run each sub in series (yeildin 8 ohms a sub). Then run all of the subs in parallel at the amp. Yeilding 2 ohms. I think this is the correct way!!

Im going to finish my box tom evening so please help.. Im almost certain the 2nd way is correct!

Thanks!!!!

[johnecon2001 82]

There is no right way as long as you can verify that you have a final 2 ohm load. And that each woofer is reading the same load as it's siblings

[Adrian_D 520]

Coils in series, subs in parallel. As far as I know, wiring the subs in series creates a small phase diffrence.

[KU40 173]

Coils in series, subs in parallel. As far as I know, wiring the subs in series creates a small phase diffrence.

That's what I was thinking. I've heard that too.