Jump to content
Sign in to follow this  
diablo_331

Diablo's 2001 Wrangler Buildup

Recommended Posts

WOW! where to start?

firstly i traded my 06 gmc that last had the 2 21's in it for this wrangler.it is an '01 sport with a 4.0L I6 with a dana 44 rear dana 30 front with 80k on her.this is not only an audio build but a typical jeep build...in fact the audio part is done...but ill be updating this thread ever so often as money comes in...

on to log...

Share this post


Link to post
Share on other sites

my father took it upon himself to throw a little cash in her before i got home...so for a month he hooked me up with 2kish worth of stuff for free :gift:

this included

superwinch LP8500

dick cepek 15x8in. wheels wrapped in dick cepek 33x12.5x15's

it also was bought with a cheap lightbar...it had to go...so i hacked it off...

when i first saw my TJ it was a little too clean so i had to give it a new paintjob....mud was the color..i think u guys will like it

other pics of the D44 and the D30

P4170144.jpg

P4170145.jpg

P4170146.jpg

P4170147.jpg

P4170148.jpg

P4170149.jpg

P4170150.jpg

P4170151.jpg

P4170153.jpg

P5290427-1.jpg

P5290426-1.jpg

P5290424-1.jpg

P5290423-1.jpg

Edited by diablo

Share this post


Link to post
Share on other sites

next on the list was a K&N cold air...

pics..

P5210361.jpg

P5210362.jpg

P5210363.jpg

P5210364.jpg

P5210365.jpg

P5210366.jpg

P5210367.jpg

P5210368.jpg

P5210369.jpg

P5210370.jpg

P5210371.jpg

P5210373.jpg

P5210374.jpg

Share this post


Link to post
Share on other sites

new headlights....while they were out i decided to paint the trim rings..

P5210377.jpg

P5210376.jpg

P5200355.jpg

P5200356.jpg

P5210357.jpg

P5210360.jpg

P5210359.jpg

P5210358.jpg

Share this post


Link to post
Share on other sites

now on to the sound system...being as the factory sound bar sounds decent and gets damn loud ill leave it for now...so this is just a simple box build..

(1) incrimidator audio lethal injection 12

(1) sundown audio sax-100.2

1.45 cubes sealed

P5190331.jpg

P5190337.jpg

P5190339.jpg

P5190344.jpg

P5190346.jpg

P5190345.jpg

P5190333.jpg

P5190332.jpg

P5190334.jpg

P5190336.jpg

P5190335.jpg

P5290417-1.jpg

P5190342.jpg

P5190343.jpg

P5190341.jpg

P5190354.jpg

P5190352.jpg

P5190347.jpg

P5190351.jpg

P5190350.jpg

P5190348.jpg

P5180325.jpg

P5180323.jpg

Share this post


Link to post
Share on other sites

i had a roll of rammatt rotting in the corner of my shop so y not use it...i put one layer down on the floor..it help with the road noise a good bit..

P5180322.jpg

P5180321.jpg

P5180320.jpg

P5180319.jpg

P5180317.jpg

P5180316.jpg

P5180315.jpg

P5180314.jpg

P5180313.jpg

P5180312.jpg

P5180311.jpg

P5180310.jpg

P5180309.jpg

P5180308.jpg

P5180307.jpg

P5180306.jpg

P5180305.jpg

P5180304.jpg

P5180303.jpg

P5180328.jpg

Share this post


Link to post
Share on other sites

then i stood back...scratched my head,looked around and saw a perfectly good D3100 and a HC800 sitting in the corner....soooo...why not stuff the D3100 under the hood and take the factory sub/amp out of the center console and put the HC800 in there???i couldnt think of a reason not to either..

P5180301.jpg

P5180300.jpg

P5180326.jpg

P5180302.jpg

P5180327.jpg

P5170276.jpg

P5170277.jpg

P5170288.jpg

P5170287.jpg

P5170283.jpg

P5180330.jpg

P5180329.jpg

Share this post


Link to post
Share on other sites

next was a highlift jack....which a kinda "borrowed" from my father...found a good place to mount it..

P5290414-1.jpg

P5290413.jpg

P5290412.jpg

P5290416-1.jpg

P5290415-1.jpg

P5290411.jpg

Share this post


Link to post
Share on other sites

after my father put the new,bigger, spare back on the third brake light no longer was tall enough so he threw it aside...well for safety reasons i found a simple fix and put it back on...just some bolts for spacers...

P5170271.jpg

P5170271-1.jpg

P5170270.jpg

P5170270-1.jpg

P5170269.jpg

P5170272-1.jpg

Share this post


Link to post
Share on other sites

Everything looks good! Keep workin hard though :)

Share this post


Link to post
Share on other sites

well she wasnt driving as good i i thought she should so i picked up a new steering stabilizer from skyjacker....and sure enough the old one was shot...i also picked up a pair of pilot offroad driving lights for the front...then i cut both the front a rear bumpers shorter to get rid of the ugly milk jug looking plastic endcaps and then weilded on some plates to the sides then primed and painted them for a smooth,factory looking, finish..

P5170266.jpg

P5170265.jpg

P5170267.jpg

P5170268.jpg

P5210379.jpg

P5210378.jpg

Share this post


Link to post
Share on other sites

i put the finishing touch(for now)before i left and went ahead a put some sundown and incrimidator vinyl on her..

well this is how she stands as of now..all this work was done when i was on leave back in Louisiana.i drove it 1100 mile to cherry point NC. and thats where i am now....with no shop and very little tools so work will be slow from here on out..

P5290404.jpg

P5290422-1.jpg

P5290421-1.jpg

P5290420-1.jpg

P5290419-1.jpg

P5290418-1.jpg

P5290410.jpg

P5290409.jpg

P5290408.jpg

P5290407.jpg

Share this post


Link to post
Share on other sites

Looking good

Share this post


Link to post
Share on other sites

Looks good

There are plenty of places in NC to have fun with that on your free time.

Share this post


Link to post
Share on other sites

Now it justs needs some mud terrains so you can hear them over the stereo :P

What gearing are you running in the axles ? Any lift to clear the 33's ?

I'd love a D44 for my xj. OX locker would be written all over me :D

Share this post


Link to post
Share on other sites

im looking to get a rubicon express 4.5 ultimate for it and of course ill be upgrading to some 35's...right now it has 3.73's in it...but ill regear with the lift to 4.56's..im also looking at aussie lockers front and rear.further down the road ill be upgrading to the long arm kit that rubicon express has.but all of this will come as money is available.

Share this post


Link to post
Share on other sites

My dad has those rims on his rubicon.... looks good.

In his there is a stock 8" sub in the center console... and in the stock sub box is the amp for the entire audio system.

Was this in yours?

Share this post


Link to post
Share on other sites

Looks like a really fun project. I have to say, that was very sweet of your dad to throw in some money like that. Great amp/sub combo. And it is good to see someone deaden a Jeep, as any little bit will help. :) :) :)

Share this post


Link to post
Share on other sites
My dad has those rims on his rubicon.... looks good.

In his there is a stock 8" sub in the center console... and in the stock sub box is the amp for the entire audio system.

Was this in yours?

my TJ had the same setup in the center console...i didnt even know it was there until i was taking out the drivers seat and i hear something rattling to the music.so i pulled the console and the factory 8" was done for.the surround was all but gone.so i pulled the amp/sub/box combo and put a hc800 i had laying around in its place...it fit like a glove.i ran 0/1 flex to the batt.,grounded to the seat then ran 4ga to the amp.its all 100% hidden under the carpet.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×