2x12bl vs 1x12 btl

[zipo 0]

now i got 1xbl @ dls a6 1200rms

145,3 db @55hz

now up-grade do steg k204 @2400rms

will be louder 2x12bl vs 1x12 btl

2x12 more cone area 1 blt more power handing

max box 2,5 cuft

"Sorry for my English

Edited June 10, 2009 by zipo

[NDMstang65 403]

2 BL's would be louder..

[BKOLFO4 29]

max box 2,5 cuft

Is that 2.5 cuft per sub, or total?

[zipo 0]

total

[BKOLFO4 29]

Hmmm. . . .

My vote is for a single BTL 12 if you only have that much air space.

I am not sure if Nick caught that you only have 2.5 cuft of airspace total. . .

You playing music at all, or just burping?

[zipo 0]

2 difrent box

1 daily for music @34hz

1 for comp. @55hz

[BKOLFO4 29]

2.5 cuft is not enough airspace for (2) 12's. . .

[zipo 0]

hymmm maybe 3x10bl vs 1x12 btl?

Edited June 11, 2009 by zipo

[-Jason- 0]

I'd say 2xBL but you said you only had 2.5cuft which isn't enough...

In the pic it looks like you could go bigger than 2.5 unless you personally don't want to

[wenn_du_weinst 1]

I would go down to 2 10" bl if you are stuck on fi but I have seen plenty of times where the aq hd3c out does the bl in spl and the aq is very close to the btl for alot less money

[Kanaworm$ 292]

With your 2.5 ^ft3 total you would be able to get louder with a single BTL with the increased power.

[wenn_du_weinst 1]

With your 2.5 ^ft3 total you would be able to get louder with a single BTL with the increased power.

not if it's 2.5 plus port than 2 10's will get louder

[Kanaworm$ 292]

With your 2.5 ^ft3 total you would be able to get louder with a single BTL with the increased power.

not if it's 2.5 plus port than 2 10's will get louder

True that!

[zipo 0]

2,5 netto vol

[antonmiller 8]

ok dont mean to thread jack but i have the same basic question.

2 12" BL in a 2 separate boxes at 2.5 cu ft after displacement each sub ported to 34 hz or 1 15" BTL in a 4.5 -5 cu ft box tuned to 34hz. which would be powered by a Rockford 2500BD. both set ups would be put in a 2 door car and half walled in the back under the rear deck, facing the cabin of the car.

Which set up is more than likely going to be louder?

[BKOLFO4 29]

ok dont mean to thread jack but i have the same basic question.

2 12" BL in a 2 separate boxes at 2.5 cu ft after displacement each sub ported to 34 hz or 1 15" BTL in a 4.5 -5 cu ft box tuned to 34hz. which would be powered by a Rockford 2500BD. both set ups would be put in a 2 door car and half walled in the back under the rear deck, facing the cabin of the car.

Which set up is more than likely going to be louder?

I would go with the pair of 12's.

[littleitaly1990 0]

2 BL's would be louder..

hmmm I went from 2 18" loaded BL's to 1 18" loaded BTL and I'm way louder now. With his space I'm thinking the 1 12 would be better.