Amp Rattle.

[B7L|BL4Z3R 4]

Ok, so i put my amp in advance and if anyone has experience with the t30001bd the top for some reason doesnt get tight. Any idea what i can do to stop the top from rattling?

[B7L|BL4Z3R 4]

idk how i can be more specific. uhm, its the top piece and even when my exaust rumbles it rattles. i can imagine when my btl start hitting.

[B7L|BL4Z3R 4]

does no one have any idea what i can do. idk what else to say......

[Jay-C76 333]

Are the screws slightly too long?

They might be bottoming out before it gets snug..

My bud just leaves his off of his T1000-1bd...says he doesn't want to scratch it up..

[B7L|BL4Z3R 4]

there isent any screws on the top thats problem. it just sits there freely i dont get it.

[Jay-C76 333]

Uh.....My buds T1000 has 2 screws on the front part of the panel....

[B7L|BL4Z3R 4]

[Jay-C76 333]

Oh, shi....um....

try a good double faced tape?

My bad I thought it was the lower panel near the terminals..LOL

[sqjeep 9]

ive used pipe cleaners taped together to create cushsion before on my amps that rattle. Maybe using them in your application may help

[B7L|BL4Z3R 4]

ill try the tape.. but i already had tried to coushin it. But everything falls down

[lithium 358]

ill try the tape.. but i already had tried to coushin it. But everything falls down

try velco, you can buy the stuff at walmart (around the sowing section), it comes with the hook side and the fluffy side backed with adhesive in strips or small circles.

[B7L|BL4Z3R 4]

i accualy have some already thats a great idea thanks