Need help with an enclosure design

[Wackzirth88 4]

I would like to build a ported enclosure for a single 12. I'm ok with building it but I'm not to positive on figuring port displacement and tuning and I figured someone here could probably help. I want the box to be 2 cu ft after port and sub displacement tuned to 32-33 hz, double baffle, sub and port firing at the trunk. I want to have quite a bit of trunk space with the box and amp in there. I measured what space I'd like to utilize and came up with 16-17" tall(preferably 16) x 24-26" wide x 16-17" deep, is that big enough for size box I'm wanting?

For anyone curious I plan to run either an icon or a ssd off my sae 1200. I'm going to use one of my Orion xtr pros until then. Also I'm going to build this enclosure out of birch plywood. I was thinking about staining it like a dark cherry or something, open to suggestions. Any and all help is greatly appreciated.

[Optimus_Prime 30]

check with Bromo or Jblcamry

[Aaron Clinton 2,372]

check with Bromo or Jblcamry

[Wackzirth88 4]

Thanks fellas

[Notorious97200 339]

check with Bromo or Jblcamry

Ooh yeah !

You will love their work ! I don't need no more/no other box designers !!!