Booyah!!!! Beast electrical on the way!!!

[Dangrebel 89]

Man that should be around the summer before that happens, I'm slowly adding on to it:)

[Duran 387]

You'll still have voltage drop, by the way.

[Dangrebel 89]

If I add a batt in the back?

[bassahaulic 155]

Um with 8,000w you'll need to produce over 800amps to not have drop.

[Dangrebel 89]

I mean right now with only a bc2000d.

[anthony.w 4]

Um with 8,000w you'll need to produce over 800amps to not have drop.

sorry to hijack this thread. bassahaulic you're saying the math is every 1000w you need an extra 100amp +or-. i'm just wondering if i'm going to need for my system.

[Duran 387]

Um with 8,000w you'll need to produce over 800amps to not have drop.

sorry to hijack this thread. bassahaulic you're saying the math is every 1000w you need an extra 100amp +or-. i'm just wondering if i'm going to need for my system.

He was averaging, but that's a good rule of thumb, the formula is:

Amperage x Voltage= Wattage

[Julian 641]

Um with 8,000w you'll need to produce over 800amps to not have drop.

sorry to hijack this thread. bassahaulic you're saying the math is every 1000w you need an extra 100amp +or-. i'm just wondering if i'm going to need for my system.

He was averaging, but that's a good rule of thumb, the formula is:

Amperage x Voltage= Wattage

You know as well as me you have to factor amplifier efficiency which can range from 65-95% depending on the class of the amp.

I was running a PB 5k off of 2 Deka's and dropping no lower than 13v, now that I have two D3100's instead of the deka's I don't drop below 14v full tilt with a stock 190 amp alt.