Strapped BC2000ds on Xcons

[R3dt34rz 21]

Gents,

Just curious if I can run my Xcon D2s at 0.5 ohms and be good, or should I just run them at 2 ohms? Electrical consists of 3 XS Power D3400s ( 1 as a front batt, 2 in the rear). I ran all zero for the Big 3, and currently have a HO alt of 250a from Excessive Amperage in the works. Just wondering how I should wire the subs on these amps. Any input is appreciated.

Also this is a daily driver, if that means much. Thanks.

Edited January 30, 2013 by R3dt34rz

[ricksi30 923]

I would wire to 2 ohms for sure.

[Impious 1,476]

.5ohm strapped is equivalent to .25ohm per amp.....not going to work.

Series-parallel for 2ohm.

[EPerez 236]

2 ohms is where your going to want/need it.

Both amps will be at 1 ohm each.

[R3dt34rz 21]

Excellent thanks gents.